Celeron N4020


[lang_hl=es,Español]Rendimiento[/lang_hl] [lang_hl=en,English]Performance[/lang_hl]
22.5 [lang_hl=es,Español]k puntos[/lang_hl] [lang_hl=en,English]k points[/lang_hl]

[lang_hl=es,Español]Descripción[/lang_hl] [lang_hl=en,English]Description[/lang_hl]
[lang_hl=es,Español]El Celeron N4020 es un procesador desarrollado por Intel que salió al mercado en Noviembre de 2019. Este modelo tiene 2 núcleos Gemini Lake, funciona a una frecuencia base de 1100 MHz y tiene un TDP de 6 W.[/lang_hl] [lang_hl=en,English]The Celeron N4020 is a cpu manufactured by Intel that was released on November 2019. This model has 2 Gemini Lake cores, runs at 1100 MHz as base frequency and has a a thermal design power of 6 W.[/lang_hl]

[lang_hl=es,Español]Goldmont Plus es la arquitectura que motoriza a los Atom, Celeron y Pentium Silver montados en un SoC. Están fabricados en el nodo de 14nm y vienen con los gráficos integrados Gen9.[/lang_hl] [lang_hl=en,English]Goldmont Plus is a low power architecture intended for Atom, Celeron y Pentium Silver SoCs. It uses the 14nm process and come with the Gen9 Intel’s iGPU.[/lang_hl]

[lang_hl=es,Español]Especificaciones[/lang_hl] [lang_hl=en,English]Specifications[/lang_hl]
[lang_hl=es,Español]Nombre oficial[/lang_hl] [lang_hl=en,English]Official Name[/lang_hl]
Intel(R) Celeron(R) N4020 CPU @ 1.10GHz
CPUID
706a8
[lang_hl=es,Español]Núcleo[/lang_hl] [lang_hl=en,English]Core[/lang_hl]
Gemini Lake
[lang_hl=es,Español]Arquitectura[/lang_hl] [lang_hl=en,English]Architecture[/lang_hl]
Goldmont Plus
[lang_hl=es,Español]Frecuencia base[/lang_hl] [lang_hl=en,English]Base Frequency[/lang_hl]
1.1 GHz
[lang_hl=es,Español]Frecuencia máxima[/lang_hl] [lang_hl=en,English]Boost Frequency[/lang_hl]
2.8 GHz
[lang_hl=es,Español]Zócalo[/lang_hl] [lang_hl=en,English]Socket[/lang_hl]
BGA 1090
[lang_hl=es,Español]Núcleos[/lang_hl] [lang_hl=en,English]Cores[/lang_hl]/[lang_hl=es,Español]Hilos[/lang_hl] [lang_hl=en,English]Threads[/lang_hl]
2/2
TDP
6 W
[lang_hl=es,Español]Caché de nivel 1 (d+i)[/lang_hl] [lang_hl=en,English]L1 Cache (d+i)[/lang_hl]
2x32+2x24 kB
[lang_hl=es,Español]Caché de nivel 2[/lang_hl] [lang_hl=en,English]L2 Cache[/lang_hl]
4096 kB
[lang_hl=es,Español]Caché de nivel 3[/lang_hl] [lang_hl=en,English]L3 Cache[/lang_hl]
0 kB
[lang_hl=es,Español]Fecha de lanzamiento[/lang_hl] [lang_hl=en,English]Release date[/lang_hl]
11/2019
[lang_hl=es,Español]Rend. medio monohilo[/lang_hl] [lang_hl=en,English]Mean monothread perf.[/lang_hl]
16.8[lang_hl=es,Español]k puntos[/lang_hl] [lang_hl=en,English]k points[/lang_hl]
[lang_hl=es,Español]Rend. medio multihilo[/lang_hl] [lang_hl=en,English]Mean multithread perf.[/lang_hl]
22.5[lang_hl=es,Español]k puntos[/lang_hl] [lang_hl=en,English]k points[/lang_hl]

[lang_hl=es,Español]Rendimiento sin optimización[/lang_hl] [lang_hl=en,English]Non-optimized benchmark[/lang_hl]
[lang_hl=es,Español]El banco de pruebas en modo 0 (FPU) mide el rendimiento del procesador con software que no ha sido optimizado para usar repertorios actuales. Se emplea el repertorio básico de la arquitectura i386 junto a las instrucciones propias de la unidad de coma flotante i387.
 
Este modo es compatible con todos los procesadores, por lo que resulta útil para comparar CPUs con repertorios dispares.[/lang_hl] [lang_hl=en,English]The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs[/lang_hl]
[lang_hl=es,Español]Monohilo[/lang_hl] [lang_hl=en,English]Monothread[/lang_hl]
[lang_hl=es,Español]Multihilo[/lang_hl] [lang_hl=en,English]Multithread[/lang_hl]
[lang_hl=es,Español]Test#1 (Enteros)[/lang_hl] [lang_hl=en,English]Test#1 (Integers)[/lang_hl]
1.25k
1.68k (x1.3)
[lang_hl=es,Español]Test#2 (Flotantes)[/lang_hl] [lang_hl=en,English]Test#2 (FP)[/lang_hl]
5.19k
7.29k (x1.4)
[lang_hl=es,Español]Test#3 (Genérico, ZIP)[/lang_hl] [lang_hl=en,English]Test#3 (Generic, ZIP)[/lang_hl]
2.57k
3.51k (x0.0)
[lang_hl=es,Español]Test#4 (Memoria)[/lang_hl] [lang_hl=en,English]Test#4 (Memory)[/lang_hl]
1.61k
1.29k (x0.8)
TOTAL
10.61k
13.78k (x1.3)

[lang_hl=es,Español]Rendimiento SSE3[/lang_hl] [lang_hl=en,English]SSE3 optimized benchmark[/lang_hl]
[lang_hl=es,Español]El banco de pruebas en modo I (SSE) está optimizado para usar instrucciones SIMD con registros de 128 bits y el repertorio SSE hasta la versión 3.

Prácticamente todos los procesadores actuales tienen compatibilidad con este modo.[/lang_hl] [lang_hl=en,English]The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.[/lang_hl]
[lang_hl=es,Español]Monohilo[/lang_hl] [lang_hl=en,English]Monothread[/lang_hl]
[lang_hl=es,Español]Multihilo[/lang_hl] [lang_hl=en,English]Multithread[/lang_hl]
[lang_hl=es,Español]Test#1 (Enteros)[/lang_hl] [lang_hl=en,English]Test#1 (Integers)[/lang_hl]
4.89k
6.78k (x1.4)
[lang_hl=es,Español]Test#2 (Flotantes)[/lang_hl] [lang_hl=en,English]Test#2 (FP)[/lang_hl]
7.45k
10.3k (x1.4)
[lang_hl=es,Español]Test#3 (Genérico, ZIP)[/lang_hl] [lang_hl=en,English]Test#3 (Generic, ZIP)[/lang_hl]
2.72k
3.7k (x0.0)
[lang_hl=es,Español]Test#4 (Memoria)[/lang_hl] [lang_hl=en,English]Test#4 (Memory)[/lang_hl]
1.74k
1.72k (x1.0)
TOTAL
16.8k
22.5k (x1.3)

[lang_hl=es,Español]Ordenadores donde se ha probado esta CPU[/lang_hl] [lang_hl=en,English]Computers where this CPU was tested[/lang_hl]

[lang_hl=es,Español]Memorias probadas junto a esta CPU[/lang_hl] [lang_hl=en,English]RAM models tested along with this CPU[/lang_hl]
[lang_hl=es,Español]Modelo[/lang_hl] [lang_hl=en,English]Model[/lang_hl]
[lang_hl=es,Español]Tipo[/lang_hl] [lang_hl=en,English]Type[/lang_hl]
[lang_hl=es,Español]Frecuencia[/lang_hl] [lang_hl=en,English]Frequency[/lang_hl]
[lang_hl=es,Español]Tamaño[/lang_hl] [lang_hl=en,English]Size[/lang_hl]
DDR4
2666 MHz
4 GB
DDR4
3200 MHz
4 GB
DDR4
2666 MHz
8 GB

[lang_hl=es,Español]Gráfica de rendimiento monohilo[/lang_hl] [lang_hl=en,English]Monothread performance graph[/lang_hl]
[lang_hl=es,Español]Las gráficas de rendimiento con respecto al tiempo en los test monohilo resultan útiles para medir cuánto tarda el procesador en alcanzar el máximo rendimiento.

Habitualmente, el rendimiento será estable durante la prueba, pero si la CPU tiene una política de cambio de frecuencia lenta, en las primeras muestras se apreciará un rendimiento inferior.
 [/lang_hl] [lang_hl=en,English]Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.

Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.[/lang_hl]


[lang_hl=es,Español]Test#1 (Enteros) [desviación][/lang_hl] [lang_hl=en,English]Test#1 (Integers) [deviation][/lang_hl]

grafica bm.hardlimit.com


[lang_hl=es,Español]Test#2 (Flotantes) [desviación][/lang_hl] [lang_hl=en,English]Test#2 (FP) [deviation][/lang_hl]

grafica bm.hardlimit.com


[lang_hl=es,Español]Test#3 (Genérico, ZIP) [desviación][/lang_hl] [lang_hl=en,English]Test#3 (Generic, ZIP) [deviation][/lang_hl]

grafica bm.hardlimit.com


[lang_hl=es,Español]Test#4 (Memoria) [desviación][/lang_hl] [lang_hl=en,English]Test#4 (Memory) [deviation][/lang_hl]

grafica bm.hardlimit.com

[lang_hl=es,Español]Gráfica de rendimiento multihilo[/lang_hl] [lang_hl=en,English]Multithread performance graph[/lang_hl]
[lang_hl=es,Español]Las gráficas de rendimiento con respecto al tiempo en los test multihilo evalúan el rendimiento del procesador ante una carga intensa durante un tiempo prudencial.

Si el TDP del procesador no supone límites y el equipo está correctamente refrigerado, el rendimiento debería ser constante en el tiempo. De lo contrario, se apreciará un rendimiento oscilante o decreciente con el tiempo.
 [/lang_hl] [lang_hl=en,English]Multithread graphs measure the performance against a heavy load during certain time.

If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.[/lang_hl]


[lang_hl=es,Español]Test#1 (Enteros) [desviación][/lang_hl] [lang_hl=en,English]Test#1 (Integers) [deviation][/lang_hl]

grafica bm.hardlimit.com


[lang_hl=es,Español]Test#2 (Flotantes) [desviación][/lang_hl] [lang_hl=en,English]Test#2 (FP) [deviation][/lang_hl]

grafica bm.hardlimit.com


[lang_hl=es,Español]Test#3 (Genérico, ZIP) [desviación][/lang_hl] [lang_hl=en,English]Test#3 (Generic, ZIP) [deviation][/lang_hl]

grafica bm.hardlimit.com


[lang_hl=es,Español]Test#4 (Memoria) [desviación][/lang_hl] [lang_hl=en,English]Test#4 (Memory) [deviation][/lang_hl]

grafica bm.hardlimit.com

[lang_hl=es,Español]CPUs similares al Celeron N4020[/lang_hl] [lang_hl=en,English]Similar CPUs to the Celeron N4020[/lang_hl]
Celeron N4020 ([lang_hl=es,Español]Este procesador[/lang_hl] [lang_hl=en,English]This CPU[/lang_hl])
 Mode FPU monothread  [10.61k points]
 Mode FPU multithread  [13.78k points]
 Mode SSE monothread  [16.8k points]
 Mode SSE multithread  [22.5k points]
 Mode FPU monothread  [5.81k points -45.25%]
 Mode FPU multithread  [18.96k points +37.60%]
 Mode SSE monothread  [9.75k points -41.96%]
 Mode SSE multithread  [33.25k points +47.80%]
 Mode FPU monothread  [0k points -100.00%]
 Mode FPU multithread  [0k points -100.00%]
 Mode SSE monothread  [10.15k points -39.60%]
 Mode SSE multithread  [13.36k points -40.60%]
 Mode FPU monothread  [7.56k points -28.76%]
 Mode FPU multithread  [17.43k points +26.52%]
 Mode SSE monothread  [17.25k points +2.70%]
 Mode SSE multithread  [43.4k points +92.92%]
 Mode FPU monothread  [13.17k points +24.05%]
 Mode FPU multithread  [41.57k points +201.77%]
 Mode SSE monothread  [18.22k points +8.48%]
 Mode SSE multithread  [61.5k points +173.37%]
 Mode FPU monothread  [7.32k points -31.00%]
 Mode FPU multithread  [13.43k points -2.50%]
 Mode SSE monothread  [9.62k points -42.73%]
 Mode SSE multithread  [17.92k points -20.33%]
 Mode FPU monothread  [7.57k points -28.63%]
 Mode FPU multithread  [13.25k points -3.80%]
 Mode SSE monothread  [11.3k points -32.75%]
 Mode SSE multithread  [22.28k points -0.96%]
 Mode FPU monothread  [6.91k points -34.94%]
 Mode FPU multithread  [13.22k points -4.03%]
 Mode SSE monothread  [8.86k points -47.29%]
 Mode SSE multithread  [17.94k points -20.25%]
 Mode FPU monothread  [0k points -100.00%]
 Mode FPU multithread  [0k points -100.00%]
 Mode SSE monothread  [17.27k points +2.81%]
 Mode SSE multithread  [54.76k points +143.43%]
 Mode FPU monothread  [41.9k points +294.79%]
 Mode FPU multithread  [164.31k points +1,092.73%]
 Mode SSE monothread  [60.93k points +262.72%]
 Mode SSE multithread  [269.85k points +1,099.60%]
 Mode FPU monothread  [0k points -100.00%]
 Mode FPU multithread  [0k points -100.00%]
 Mode SSE monothread  [15.94k points -5.14%]
 Mode SSE multithread  [33.14k points +47.33%]
          
[lang_hl=es,Español]Comparativa en modo FPU[/lang_hl] [lang_hl=en,English]FPU mode comparison[/lang_hl]

[lang_hl=es,Español]Cálculos con coma flotante monohilo[/lang_hl] [lang_hl=en,English]Monothread floating point operations[/lang_hl]

[lang_hl=es,Español]Cálculos con coma flotante multihilo[/lang_hl] [lang_hl=en,English]Multithread floating point operations[/lang_hl]

[lang_hl=es,Español]Test genérico (compresión en zip) monohilo[/lang_hl] [lang_hl=en,English]Monothread generic test (Zip compression)[/lang_hl]
          
[lang_hl=es,Español]Comparativa en modo SSE[/lang_hl] [lang_hl=en,English]SSE mode comparison[/lang_hl]

[lang_hl=es,Español]Cálculos con coma flotante multihilo[/lang_hl] [lang_hl=en,English]Multithread floating point operations[/lang_hl]

[lang_hl=es,Español]Test genérico (compresión en zip) monohilo[/lang_hl] [lang_hl=en,English]Monothread generic test (Zip compression)[/lang_hl]

Hardlimit Benchmark Central - Ver. 4.1.0