Celeron N4020 vs Pentium N5000
Description
Both models N4020 and N5000 are based on Goldmont Plus architecture.
Goldmont Plus is a low power architecture intended for Atom, Celeron y Pentium Silver SoCs. It uses the 14nm process and come with the Gen9 Intel’s iGPU.
Using the multithread performance as a reference, the N4020 gets a score of 25.3 k points while the N5000 gets 54.8 k points.
Summarizing, the N5000 is 2.2 times faster than the N4020. To get a proper comparison between both models, take a look to the data shown below.
Goldmont Plus is a low power architecture intended for Atom, Celeron y Pentium Silver SoCs. It uses the 14nm process and come with the Gen9 Intel’s iGPU.
Using the multithread performance as a reference, the N4020 gets a score of 25.3 k points while the N5000 gets 54.8 k points.
Summarizing, the N5000 is 2.2 times faster than the N4020. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
706a8
706a1
Core
Gemini Lake
Gemini Lake
Base frecuency
1.1 GHz
1.1 GHz
Boost frecuency
2.8 GHz
2.7 GHz
Socket
BGA 1090
BGA 1090
Cores/Threads
2/2
4/4
TDP
6 W
6 W
Cache L1 (d+i)
2x32+2x24 kB
4x32+4x24 kB
Cache L2
4096 kB
4096 kB
Date
November 2019
December 2017
Mean monothread perf.
17.67k points
17.27k points
Mean multithread perf.
25.26k points
54.76k points
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
N4020
N5000
Test#1 (Integers)
5.14k
5.12k (x0.99)
Test#2 (FP)
7.89k
7.66k (x0.97)
Test#3 (Generic, ZIP)
2.87k
2.79k (x0.97)
Test#1 (Memory)
1.76k
1.7k (x0.97)
TOTAL
17.67k
17.27k (x0.98)
Multithread
N4020
N5000
Test#1 (Integers)
7.46k
17.56k (x2.35)
Test#2 (FP)
11.61k
25.71k (x2.21)
Test#3 (Generic, ZIP)
4.27k
9.45k (x2.21)
Test#1 (Memory)
1.91k
2.05k (x1.07)
TOTAL
25.26k
54.76k (x2.17)
Performance/W
N4020
N5000
Test#1 (Integers)
1244 points/W
2927 points/W
Test#2 (FP)
1936 points/W
4284 points/W
Test#3 (Generic, ZIP)
712 points/W
1574 points/W
Test#1 (Memory)
319 points/W
341 points/W
TOTAL
4211 points/W
9127 points/W
Performance/GHz
N4020
N5000
Test#1 (Integers)
1837 points/GHz
1895 points/GHz
Test#2 (FP)
2816 points/GHz
2838 points/GHz
Test#3 (Generic, ZIP)
1026 points/GHz
1032 points/GHz
Test#1 (Memory)
630 points/GHz
631 points/GHz
TOTAL
6309 points/GHz
6396 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4