The Core i7-1280P is a cpu manufactured by Intel that was released on April 2022. This model has 14 Alder Lake-P cores with HyperThreading, runs at 1300 MHz as base frequency and has a a thermal design power of 28 W.
Alder Lake is the 12th generation of Intel Core. It uses the 10nm proccess and was the first to introduce a hybrid architecture with Performance cores and Efficiency cores.
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
Multithread
Test#1 (Integers)
6.94k
44.01k (x6.3)
Test#2 (FP)
18.46k
125.05k (x6.8)
Test#3 (Generic, ZIP)
11.27k
76.28k (x6.8)
Test#1 (Memory)
13.6k
15.52k (x1.1)
TOTAL
50.27k
260.85k (x5.2)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
Multithread
Test#1 (Integers)
22.72k
151.95k (x6.7)
Test#2 (FP)
23.88k
160.95k (x6.7)
Test#3 (Generic, ZIP)
12.75k
84.9k (x6.7)
Test#1 (Memory)
13.71k
15.91k (x1.2)
TOTAL
73.05k
413.72k (x5.7)
AVX optimized benchmark
The benchmark in mode II (AVX) is optimized to used 256 bits registers beside the first version of the Advanced Vector Extensions (AVX). The first AVX compatible CPU was released in 2011.
Monothread
Multithread
Test#1 (Integers)
22.76k
149.83k (x6.6)
Test#2 (FP)
25.2k
170.43k (x6.8)
Test#3 (Generic, ZIP)
12.64k
83.32k (x6.6)
Test#1 (Memory)
13.33k
15.67k (x1.2)
TOTAL
73.92k
419.25k (x5.7)
AVX2 optimized benchmark
The benchmark in mode III (AVX2), like AVX1, is optimized to used 256 bits registers beside the second version of the Advanced Vector Extensions (AVX). The first AVX2 compatible CPU was released in 2013.
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [% vs time]
Test#2 (FP) [% vs time]
Test#3 (Generic, ZIP) [% vs time]
Test#1 (Memory) [% vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.