Ryzen 5 1600X vs Core i7-1280P
Description
The 1600X is based on Zen architecture while the i7-1280P is based on Alder Lake.
Using the multithread performance as a reference, the 1600X gets a score of 173.2 k points while the i7-1280P gets 468.3 k points.
Summarizing, the i7-1280P is 2.7 times faster than the 1600X. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the 1600X gets a score of 173.2 k points while the i7-1280P gets 468.3 k points.
Summarizing, the i7-1280P is 2.7 times faster than the 1600X. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
800f11
906a3
Core
Summit Ridge
Alder Lake-P
Base frecuency
3.6 GHz
1.3 GHz
Boost frecuency
4 GHz
4.8 GHz
Socket
AM4
BGA 1744
Cores/Threads
6/12
14/20
TDP
95 W
28 W
Cache L1 (d+i)
6x64+6x32 kB
6x32/8x64+6x48/8x32 kB
Cache L2
6x512 kB
6x1280+6x2048 kB
Cache L3
2x8192 kB
24576 kB
Date
April 2017
April 2022
Mean monothread perf.
60.09k points
91.45k points
Mean multithread perf.
173.2k points
468.3k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
1600X
i7-1280P
Test#1 (Integers)
3.95k
6.94k (x1.76)
Test#2 (FP)
18.36k
18.46k (x1.01)
Test#3 (Generic, ZIP)
5.39k
11.27k (x2.09)
Test#1 (Memory)
17.35k
13.6k (x0.78)
TOTAL
45.06k
50.27k (x1.12)
Multithread
1600X
i7-1280P
Test#1 (Integers)
19.47k
44.01k (x2.26)
Test#2 (FP)
77.19k
125.05k (x1.62)
Test#3 (Generic, ZIP)
15.4k
76.28k (x4.95)
Test#1 (Memory)
12.25k
15.52k (x1.27)
TOTAL
124.3k
260.85k (x2.1)
AVX2 optimized benchmark
The benchmark in mode III (AVX2), like AVX1, is optimized to used 256 bits registers beside the second version of the Advanced Vector Extensions (AVX). The first AVX2 compatible CPU was released in 2013.
Monothread
1600X
i7-1280P
Test#1 (Integers)
14.63k
39.78k (x2.72)
Test#2 (FP)
24.09k
26.06k (x1.08)
Test#3 (Generic, ZIP)
5.51k
12.44k (x2.26)
Test#1 (Memory)
15.86k
13.17k (x0.83)
TOTAL
60.09k
91.45k (x1.52)
Multithread
1600X
i7-1280P
Test#1 (Integers)
48.75k
209.96k (x4.31)
Test#2 (FP)
80.1k
170.21k (x2.12)
Test#3 (Generic, ZIP)
24.5k
72.04k (x2.94)
Test#1 (Memory)
19.85k
16.09k (x0.81)
TOTAL
173.2k
468.3k (x2.7)
Performance/W
1600X
i7-1280P
Test#1 (Integers)
513 points/W
7499 points/W
Test#2 (FP)
843 points/W
6079 points/W
Test#3 (Generic, ZIP)
258 points/W
2573 points/W
Test#1 (Memory)
209 points/W
575 points/W
TOTAL
1823 points/W
16725 points/W
Performance/GHz
1600X
i7-1280P
Test#1 (Integers)
3659 points/GHz
8287 points/GHz
Test#2 (FP)
6022 points/GHz
5429 points/GHz
Test#3 (Generic, ZIP)
1378 points/GHz
2592 points/GHz
Test#1 (Memory)
3966 points/GHz
2744 points/GHz
TOTAL
15023 points/GHz
19051 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4