Pentium Dual-Core T4500 vs Core i3-6100U
Description
The T4500 is based on Core architecture while the i3-6100U is based on Skylake.
Using the multithread performance as a reference, the T4500 gets a score of 22.7 k points while the i3-6100U gets 50.2 k points.
Summarizing, the i3-6100U is 2.2 times faster than the T4500. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the T4500 gets a score of 22.7 k points while the i3-6100U gets 50.2 k points.
Summarizing, the i3-6100U is 2.2 times faster than the T4500. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
1067a
406e3
Core
Penryn-3M
Skylake-U
Base frecuency
2.3 GHz
2.3 GHz
Socket
Socket P
BGA1356
Cores/Threads
2/2
2/4
TDP
35 W
15 W
Cache L1 (d+i)
32+32 kB
2x32+2x32 kB
Cache L2
1024 kB
2x256 kB
Cache L3
0 kB
3072 kB
Date
January 2010
September 2015
Mean monothread perf.
12.06k points
30.73k points
Mean multithread perf.
22.71k points
69.94k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
T4500
i3-6100U
Test#1 (Integers)
2.08k
2.27k (x1.09)
Test#2 (FP)
5.4k
9.18k (x1.7)
Test#3 (Generic, ZIP)
2.27k
2.97k (x1.31)
Test#1 (Memory)
1.21k
3.79k (x3.12)
TOTAL
10.96k
18.21k (x1.66)
Multithread
T4500
i3-6100U
Test#1 (Integers)
4.11k
4.79k (x1.16)
Test#2 (FP)
10.61k
23.04k (x2.17)
Test#3 (Generic, ZIP)
4.47k
7.55k (x1.69)
Test#1 (Memory)
1.33k
3.86k (x2.89)
TOTAL
20.52k
39.24k (x1.91)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
T4500
i3-6100U
Test#1 (Integers)
2.64k
7.99k (x3.03)
Test#2 (FP)
5.88k
11.82k (x2.01)
Test#3 (Generic, ZIP)
2.36k
2.97k (x1.26)
Test#1 (Memory)
1.19k
3.75k (x3.16)
TOTAL
12.06k
26.52k (x2.2)
Multithread
T4500
i3-6100U
Test#1 (Integers)
5.21k
15.44k (x2.96)
Test#2 (FP)
11.52k
23.79k (x2.07)
Test#3 (Generic, ZIP)
4.65k
6.93k (x1.49)
Test#1 (Memory)
1.33k
4.03k (x3.02)
TOTAL
22.71k
50.19k (x2.21)
Performance/W
T4500
i3-6100U
Test#1 (Integers)
149 points/W
1029 points/W
Test#2 (FP)
329 points/W
1586 points/W
Test#3 (Generic, ZIP)
133 points/W
462 points/W
Test#1 (Memory)
38 points/W
269 points/W
TOTAL
649 points/W
3346 points/W
Performance/GHz
T4500
i3-6100U
Test#1 (Integers)
1147 points/GHz
3474 points/GHz
Test#2 (FP)
2555 points/GHz
5137 points/GHz
Test#3 (Generic, ZIP)
1026 points/GHz
1290 points/GHz
Test#1 (Memory)
517 points/GHz
1631 points/GHz
TOTAL
5245 points/GHz
11532 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4