Xeon E5645 vs Core i3-10100T
Description
The E5645 is based on Westmere architecture while the i3-10100T is based on Comet Lake.
Using the multithread performance as a reference, the E5645 gets a score of 77 k points while the i3-10100T gets 173.3 k points.
Summarizing, the i3-10100T is 2.3 times faster than the E5645 . To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the E5645 gets a score of 77 k points while the i3-10100T gets 173.3 k points.
Summarizing, the i3-10100T is 2.3 times faster than the E5645 . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
206c2
a0653
Core
Westmere-EP
Comet Lake-S
Base frecuency
2.4 GHz
3.6 GHz
Boost frecuency
2.8 GHz
4.3 GHz
Socket
LGA 1366
FC-LGA 1200
Cores/Threads
6 /6
4/8
TDP
80 W
65 W
Cache L1 (d+i)
64 kB
4x32+4x32 kB
Cache L2
256 kB
4x256 kB
Cache L3
12288 kB
6144 kB
Date
March 2010
April 2020
Mean monothread perf.
15.64k points
60.06k points
Mean multithread perf.
76.96k points
227.67k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
E5645
i3-10100T
Test#1 (Integers)
1.78k
4.32k (x2.43)
Test#2 (FP)
3.91k
15.7k (x4.01)
Test#3 (Generic, ZIP)
2.52k
5.04k (x2)
Test#1 (Memory)
2.42k
7.68k (x3.17)
TOTAL
10.64k
32.73k (x3.08)
Multithread
E5645
i3-10100T
Test#1 (Integers)
9.67k
16.59k (x1.72)
Test#2 (FP)
22.92k
71.1k (x3.1)
Test#3 (Generic, ZIP)
14.31k
23.26k (x1.63)
Test#1 (Memory)
3.81k
3.86k (x1.01)
TOTAL
50.7k
114.81k (x2.26)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
E5645
i3-10100T
Test#1 (Integers)
6.47k
13.84k (x2.14)
Test#2 (FP)
4.4k
19.79k (x4.49)
Test#3 (Generic, ZIP)
2.43k
5.28k (x2.18)
Test#1 (Memory)
2.33k
8.31k (x3.56)
TOTAL
15.64k
47.22k (x3.02)
Multithread
E5645
i3-10100T
Test#1 (Integers)
34.43k
54.67k (x1.59)
Test#2 (FP)
24.23k
90.71k (x3.74)
Test#3 (Generic, ZIP)
14.48k
24.11k (x1.67)
Test#1 (Memory)
3.81k
3.85k (x1.01)
TOTAL
76.96k
173.34k (x2.25)
Performance/W
E5645
i3-10100T
Test#1 (Integers)
430 points/W
841 points/W
Test#2 (FP)
303 points/W
1396 points/W
Test#3 (Generic, ZIP)
181 points/W
371 points/W
Test#1 (Memory)
48 points/W
59 points/W
TOTAL
962 points/W
2667 points/W
Performance/GHz
E5645
i3-10100T
Test#1 (Integers)
2311 points/GHz
3218 points/GHz
Test#2 (FP)
1573 points/GHz
4602 points/GHz
Test#3 (Generic, ZIP)
867 points/GHz
1228 points/GHz
Test#1 (Memory)
833 points/GHz
1934 points/GHz
TOTAL
5584 points/GHz
10982 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4