Xeon E5-2667 v3 vs Core i5-4570
Description
Both models E5-2667 v3 and i5-4570 are based on Haswell architecture.
"Haswell is known as fourth-generation core too. It uses 22nm Tri-Gate FinFET (non-planar, ""3D"") technology. It includes four arithmetic logic unit (ALU) and three address generation unit (AGU). This generation is able to run Advanced Vector Extensions 2 (AVX2) instruction set among BMI1, BMI2, ABM and FMA3. At this time, Intel used new sockets: LGA 1150 for desktops and BGA1364 for the mobile CPUs."
Using the multithread performance as a reference, the E5-2667 v3 gets a score of 343.6 k points while the i5-4570 gets 161.6 k points.
Summarizing, the E5-2667 v3 is 2.1 times faster than the i5-4570 . To get a proper comparison between both models, take a look to the data shown below.
"Haswell is known as fourth-generation core too. It uses 22nm Tri-Gate FinFET (non-planar, ""3D"") technology. It includes four arithmetic logic unit (ALU) and three address generation unit (AGU). This generation is able to run Advanced Vector Extensions 2 (AVX2) instruction set among BMI1, BMI2, ABM and FMA3. At this time, Intel used new sockets: LGA 1150 for desktops and BGA1364 for the mobile CPUs."
Using the multithread performance as a reference, the E5-2667 v3 gets a score of 343.6 k points while the i5-4570 gets 161.6 k points.
Summarizing, the E5-2667 v3 is 2.1 times faster than the i5-4570 . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
306f2
306c3
Core
Haswell-EP
Haswell
Base frecuency
3.2 GHz
3.2 GHz
Boost frecuency
3.6 GHz
3.6 GHz
Socket
LGA 2011-3
LGA 1150
Cores/Threads
8/16
4/4
TDP
135 W
84 W
Cache L1 (d+i)
8x32+8x32 kB
32+32 kB
Cache L2
8x256 kB
256 kB
Cache L3
20480 kB
6144 kB
Date
September 2014
September 2013
Mean monothread perf.
41.36k points
43.56k points
Mean multithread perf.
343.64k points
161.61k points
AVX optimized benchmark
The benchmark in mode II (AVX) is optimized to used 256 bits registers beside the first version of the Advanced Vector Extensions (AVX). The first AVX compatible CPU was released in 2011.
Monothread
E5-2667 v3
i5-4570
Test#1 (Integers)
13.1k
13.13k (x1)
Test#2 (FP)
11.91k
12.02k (x1.01)
Test#3 (Generic, ZIP)
4.83k
5k (x1.03)
Test#1 (Memory)
3.83k
4.65k (x1.21)
TOTAL
33.68k
34.8k (x1.03)
Multithread
E5-2667 v3
i5-4570
Test#1 (Integers)
105.42k
49.75k (x0.47)
Test#2 (FP)
109.99k
45.72k (x0.42)
Test#3 (Generic, ZIP)
44.56k
19.93k (x0.45)
Test#1 (Memory)
17.7k
9.05k (x0.51)
TOTAL
277.66k
124.44k (x0.45)
AVX2 optimized benchmark
The benchmark in mode III (AVX2), like AVX1, is optimized to used 256 bits registers beside the second version of the Advanced Vector Extensions (AVX). The first AVX2 compatible CPU was released in 2013.
Monothread
E5-2667 v3
i5-4570
Test#1 (Integers)
20.99k
21.72k (x1.03)
Test#2 (FP)
11.9k
12.27k (x1.03)
Test#3 (Generic, ZIP)
4.72k
5.03k (x1.07)
Test#1 (Memory)
3.75k
4.54k (x1.21)
TOTAL
41.36k
43.56k (x1.05)
Multithread
E5-2667 v3
i5-4570
Test#1 (Integers)
172.62k
85.75k (x0.5)
Test#2 (FP)
110.03k
48.71k (x0.44)
Test#3 (Generic, ZIP)
44.06k
20.08k (x0.46)
Test#1 (Memory)
16.93k
7.07k (x0.42)
TOTAL
343.64k
161.61k (x0.47)
Performance/W
E5-2667 v3
i5-4570
Test#1 (Integers)
1279 points/W
1021 points/W
Test#2 (FP)
815 points/W
580 points/W
Test#3 (Generic, ZIP)
326 points/W
239 points/W
Test#1 (Memory)
125 points/W
84 points/W
TOTAL
2545 points/W
1924 points/W
Performance/GHz
E5-2667 v3
i5-4570
Test#1 (Integers)
5830 points/GHz
6034 points/GHz
Test#2 (FP)
3305 points/GHz
3408 points/GHz
Test#3 (Generic, ZIP)
1311 points/GHz
1398 points/GHz
Test#1 (Memory)
1043 points/GHz
1261 points/GHz
TOTAL
11489 points/GHz
12101 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4