Core 2 Duo T6400 vs E Series E-350
Description
The T6400 is based on Core architecture while the E-350 is based on Bobcat.
Using the multithread performance as a reference, the T6400 gets a score of 17.1 k points while the E-350 gets 10 k points.
Summarizing, the T6400 is 1.7 times faster than the E-350. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the T6400 gets a score of 17.1 k points while the E-350 gets 10 k points.
Summarizing, the T6400 is 1.7 times faster than the E-350. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
1067a
500f10
Core
Penryn-3M
Zacate
Base frecuency
2 GHz
1.6 GHz
Socket
FC-PGA
Socket FT1
Cores/Threads
2/2
2/2
TDP
35 W
18 W
Cache L1 (d+i)
2x32+2x32 kB
kB
Cache L2
2048 kB
2x512 kB
Date
January 2009
January 2011
Mean monothread perf.
10.08k points
6.26k points
Mean multithread perf.
17.08k points
10.05k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
T6400
E-350
Test#1 (Integers)
1.76k
0.83k (x0.47)
Test#2 (FP)
4.63k
2.38k (x0.51)
Test#3 (Generic, ZIP)
1.86k
1.41k (x0.76)
Test#1 (Memory)
1k
0.75k (x0.75)
TOTAL
9.24k
5.37k (x0.58)
Multithread
T6400
E-350
Test#1 (Integers)
3.21k
1.45k (x0.45)
Test#2 (FP)
8.75k
3.97k (x0.45)
Test#3 (Generic, ZIP)
3.47k
2.18k (x0.63)
Test#1 (Memory)
1.14k
0.82k (x0.72)
TOTAL
16.58k
8.42k (x0.51)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
T6400
E-350
Test#1 (Integers)
2.26k
1.78k (x0.79)
Test#2 (FP)
4.98k
2.33k (x0.47)
Test#3 (Generic, ZIP)
1.89k
1.41k (x0.75)
Test#1 (Memory)
0.96k
0.74k (x0.78)
TOTAL
10.08k
6.26k (x0.62)
Multithread
T6400
E-350
Test#1 (Integers)
4.06k
2.84k (x0.7)
Test#2 (FP)
8.53k
3.89k (x0.46)
Test#3 (Generic, ZIP)
3.38k
2.42k (x0.72)
Test#1 (Memory)
1.11k
0.9k (x0.81)
TOTAL
17.08k
10.05k (x0.59)
Performance/W
T6400
E-350
Test#1 (Integers)
116 points/W
158 points/W
Test#2 (FP)
244 points/W
216 points/W
Test#3 (Generic, ZIP)
96 points/W
134 points/W
Test#1 (Memory)
32 points/W
50 points/W
TOTAL
488 points/W
558 points/W
Performance/GHz
T6400
E-350
Test#1 (Integers)
1128 points/GHz
1115 points/GHz
Test#2 (FP)
2491 points/GHz
1454 points/GHz
Test#3 (Generic, ZIP)
944 points/GHz
879 points/GHz
Test#1 (Memory)
478 points/GHz
465 points/GHz
TOTAL
5040 points/GHz
3914 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4