Core i7-920 vs Xeon E5645
Description
The i7-920 is based on Nehalem Westmere architecture while the E5645 is based on Westmere.
Using the multithread performance as a reference, the i7-920 gets a score of 47.2 k points while the E5645 gets 77 k points.
Summarizing, the E5645 is 1.6 times faster than the i7-920 . To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the i7-920 gets a score of 47.2 k points while the E5645 gets 77 k points.
Summarizing, the E5645 is 1.6 times faster than the i7-920 . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
106a5
206c2
Core
Bloomfield
Westmere-EP
Base frecuency
2.667 GHz
2.4 GHz
Boost frecuency
2.993 GHz
2.8 GHz
Socket
LGA 1366
LGA 1366
Cores/Threads
4/8
6 /6
TDP
130 W
80 W
Cache L1 (d+i)
32+32 kB
64 kB
Cache L2
256 kB
256 kB
Cache L3
8192 kB
12288 kB
Date
November 2008
March 2010
Mean monothread perf.
16.33k points
15.64k points
Mean multithread perf.
47.2k points
76.96k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
i7-920
E5645
Test#1 (Integers)
1.97k
1.78k (x0.9)
Test#2 (FP)
4.43k
3.91k (x0.88)
Test#3 (Generic, ZIP)
2.75k
2.52k (x0.92)
Test#1 (Memory)
2.53k
2.42k (x0.96)
TOTAL
11.68k
10.64k (x0.91)
Multithread
i7-920
E5645
Test#1 (Integers)
7.71k
9.67k (x1.25)
Test#2 (FP)
18.81k
22.92k (x1.22)
Test#3 (Generic, ZIP)
13.76k
14.31k (x1.04)
Test#1 (Memory)
5.07k
3.81k (x0.75)
TOTAL
45.34k
50.7k (x1.12)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
i7-920
E5645
Test#1 (Integers)
6.12k
6.47k (x1.06)
Test#2 (FP)
4.76k
4.4k (x0.92)
Test#3 (Generic, ZIP)
2.78k
2.43k (x0.87)
Test#1 (Memory)
2.67k
2.33k (x0.87)
TOTAL
16.33k
15.64k (x0.96)
Multithread
i7-920
E5645
Test#1 (Integers)
19.26k
34.43k (x1.79)
Test#2 (FP)
14.96k
24.23k (x1.62)
Test#3 (Generic, ZIP)
8.05k
14.48k (x1.8)
Test#1 (Memory)
4.92k
3.81k (x0.77)
TOTAL
47.2k
76.96k (x1.63)
Performance/W
i7-920
E5645
Test#1 (Integers)
148 points/W
430 points/W
Test#2 (FP)
115 points/W
303 points/W
Test#3 (Generic, ZIP)
62 points/W
181 points/W
Test#1 (Memory)
38 points/W
48 points/W
TOTAL
363 points/W
962 points/W
Performance/GHz
i7-920
E5645
Test#1 (Integers)
2044 points/GHz
2311 points/GHz
Test#2 (FP)
1591 points/GHz
1573 points/GHz
Test#3 (Generic, ZIP)
930 points/GHz
867 points/GHz
Test#1 (Memory)
891 points/GHz
833 points/GHz
TOTAL
5457 points/GHz
5584 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4