Core i7-6560U vs i7-10750H
Description
The i7-6560U is based on Skylake architecture while the i7-10750H is based on Comet Lake.
Using the multithread performance as a reference, the i7-6560U gets a score of 107 k points while the i7-10750H gets 349.2 k points.
Summarizing, the i7-10750H is 3.3 times faster than the i7-6560U. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the i7-6560U gets a score of 107 k points while the i7-10750H gets 349.2 k points.
Summarizing, the i7-10750H is 3.3 times faster than the i7-6560U. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
406e3
a0652
Core
Skylake-U
Comet Lake-H
Base frecuency
2.2 GHz
2.6 GHz
Boost frecuency
3.2 GHz
5 GHz
Socket
BGA1356
BGA 1440
Cores/Threads
2/4
6/12
TDP
15 W
45 W
Cache L1 (d+i)
2x32+2x32 kB
6x32+6x32 kB
Cache L2
2x256 kB
6x256 kB
Cache L3
4096 kB
12288 kB
Date
September 2015
April 2020
Mean monothread perf.
52.96k points
75.67k points
Mean multithread perf.
107.01k points
349.21k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
i7-6560U
i7-10750H
Test#1 (Integers)
3.29k
4.69k (x1.43)
Test#2 (FP)
13.52k
18.71k (x1.38)
Test#3 (Generic, ZIP)
4.24k
5.84k (x1.38)
Test#1 (Memory)
7.08k
13.95k (x1.97)
TOTAL
28.14k
43.19k (x1.53)
Multithread
i7-6560U
i7-10750H
Test#1 (Integers)
6.49k
18.79k (x2.89)
Test#2 (FP)
31.11k
86.1k (x2.77)
Test#3 (Generic, ZIP)
10.25k
27.42k (x2.67)
Test#1 (Memory)
6.16k
5.27k (x0.86)
TOTAL
54.01k
137.58k (x2.55)
AVX2 optimized benchmark
The benchmark in mode III (AVX2), like AVX1, is optimized to used 256 bits registers beside the second version of the Advanced Vector Extensions (AVX). The first AVX2 compatible CPU was released in 2013.
Monothread
i7-6560U
i7-10750H
Test#1 (Integers)
22.21k
29.06k (x1.31)
Test#2 (FP)
19.25k
26.49k (x1.38)
Test#3 (Generic, ZIP)
4.41k
6.23k (x1.41)
Test#1 (Memory)
7.09k
13.89k (x1.96)
TOTAL
52.96k
75.67k (x1.43)
Multithread
i7-6560U
i7-10750H
Test#1 (Integers)
44.94k
154.61k (x3.44)
Test#2 (FP)
44.98k
151.34k (x3.36)
Test#3 (Generic, ZIP)
10.83k
36.33k (x3.35)
Test#1 (Memory)
6.26k
6.93k (x1.11)
TOTAL
107.01k
349.21k (x3.26)
Performance/W
i7-6560U
i7-10750H
Test#1 (Integers)
2996 points/W
3436 points/W
Test#2 (FP)
2998 points/W
3363 points/W
Test#3 (Generic, ZIP)
722 points/W
807 points/W
Test#1 (Memory)
418 points/W
154 points/W
TOTAL
7134 points/W
7760 points/W
Performance/GHz
i7-6560U
i7-10750H
Test#1 (Integers)
6941 points/GHz
5811 points/GHz
Test#2 (FP)
6017 points/GHz
5298 points/GHz
Test#3 (Generic, ZIP)
1377 points/GHz
1246 points/GHz
Test#1 (Memory)
2214 points/GHz
2778 points/GHz
TOTAL
16550 points/GHz
15133 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4