Core i5-4570 vs Xeon E3-1220 v3
Description
Both models i5-4570 and E3-1220 v3 are based on Haswell architecture.
"Haswell is known as fourth-generation core too. It uses 22nm Tri-Gate FinFET (non-planar, ""3D"") technology. It includes four arithmetic logic unit (ALU) and three address generation unit (AGU). This generation is able to run Advanced Vector Extensions 2 (AVX2) instruction set among BMI1, BMI2, ABM and FMA3. At this time, Intel used new sockets: LGA 1150 for desktops and BGA1364 for the mobile CPUs."
Using the multithread performance as a reference, the i5-4570 gets a score of 161.6 k points while the E3-1220 v3 gets 140.8 k points.
Summarizing, the i5-4570 is 1.1 times faster than the E3-1220 v3 . To get a proper comparison between both models, take a look to the data shown below.
"Haswell is known as fourth-generation core too. It uses 22nm Tri-Gate FinFET (non-planar, ""3D"") technology. It includes four arithmetic logic unit (ALU) and three address generation unit (AGU). This generation is able to run Advanced Vector Extensions 2 (AVX2) instruction set among BMI1, BMI2, ABM and FMA3. At this time, Intel used new sockets: LGA 1150 for desktops and BGA1364 for the mobile CPUs."
Using the multithread performance as a reference, the i5-4570 gets a score of 161.6 k points while the E3-1220 v3 gets 140.8 k points.
Summarizing, the i5-4570 is 1.1 times faster than the E3-1220 v3 . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
306c3
306c3
Core
Haswell
Haswell-WS
Base frecuency
3.2 GHz
3.1 GHz
Boost frecuency
3.6 GHz
3.5 GHz
Socket
LGA 1150
LGA 1150
Cores/Threads
4/4
4 /4
TDP
84 W
80 W
Cache L1 (d+i)
32+32 kB
64 kB
Cache L2
256 kB
256 kB
Cache L3
6144 kB
8192 kB
Date
September 2013
June 2013
Mean monothread perf.
43.56k points
39.16k points
Mean multithread perf.
161.61k points
140.76k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
i5-4570
E3-1220 v3
Test#1 (Integers)
4.16k
3.45k (x0.83)
Test#2 (FP)
10.33k
9.96k (x0.96)
Test#3 (Generic, ZIP)
4.74k
4.26k (x0.9)
Test#1 (Memory)
4.33k
4.27k (x0.99)
TOTAL
23.56k
21.94k (x0.93)
Multithread
i5-4570
E3-1220 v3
Test#1 (Integers)
16.5k
14.01k (x0.85)
Test#2 (FP)
41.12k
37.68k (x0.92)
Test#3 (Generic, ZIP)
18.71k
17.05k (x0.91)
Test#1 (Memory)
7.43k
7.35k (x0.99)
TOTAL
83.76k
76.09k (x0.91)
AVX2 optimized benchmark
The benchmark in mode III (AVX2), like AVX1, is optimized to used 256 bits registers beside the second version of the Advanced Vector Extensions (AVX). The first AVX2 compatible CPU was released in 2013.
Monothread
i5-4570
E3-1220 v3
Test#1 (Integers)
21.72k
19.17k (x0.88)
Test#2 (FP)
12.27k
10.55k (x0.86)
Test#3 (Generic, ZIP)
5.03k
4.79k (x0.95)
Test#1 (Memory)
4.54k
4.65k (x1.02)
TOTAL
43.56k
39.16k (x0.9)
Multithread
i5-4570
E3-1220 v3
Test#1 (Integers)
85.75k
73.13k (x0.85)
Test#2 (FP)
48.71k
42.06k (x0.86)
Test#3 (Generic, ZIP)
20.08k
18.03k (x0.9)
Test#1 (Memory)
7.07k
7.54k (x1.07)
TOTAL
161.61k
140.76k (x0.87)
Performance/W
i5-4570
E3-1220 v3
Test#1 (Integers)
1021 points/W
914 points/W
Test#2 (FP)
580 points/W
526 points/W
Test#3 (Generic, ZIP)
239 points/W
225 points/W
Test#1 (Memory)
84 points/W
94 points/W
TOTAL
1924 points/W
1759 points/W
Performance/GHz
i5-4570
E3-1220 v3
Test#1 (Integers)
6034 points/GHz
5478 points/GHz
Test#2 (FP)
3408 points/GHz
3014 points/GHz
Test#3 (Generic, ZIP)
1398 points/GHz
1368 points/GHz
Test#1 (Memory)
1261 points/GHz
1328 points/GHz
TOTAL
12101 points/GHz
11188 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4