Core i5-4200U vs Xeon E5-2680 v3
Description
Both models i5-4200U and E5-2680 v3 are based on Haswell architecture.
"Haswell is known as fourth-generation core too. It uses 22nm Tri-Gate FinFET (non-planar, ""3D"") technology. It includes four arithmetic logic unit (ALU) and three address generation unit (AGU). This generation is able to run Advanced Vector Extensions 2 (AVX2) instruction set among BMI1, BMI2, ABM and FMA3. At this time, Intel used new sockets: LGA 1150 for desktops and BGA1364 for the mobile CPUs."
Using the multithread performance as a reference, the i5-4200U gets a score of 57.8 k points while the E5-2680 v3 gets 426.6 k points.
Summarizing, the E5-2680 v3 is 7.4 times faster than the i5-4200U . To get a proper comparison between both models, take a look to the data shown below.
"Haswell is known as fourth-generation core too. It uses 22nm Tri-Gate FinFET (non-planar, ""3D"") technology. It includes four arithmetic logic unit (ALU) and three address generation unit (AGU). This generation is able to run Advanced Vector Extensions 2 (AVX2) instruction set among BMI1, BMI2, ABM and FMA3. At this time, Intel used new sockets: LGA 1150 for desktops and BGA1364 for the mobile CPUs."
Using the multithread performance as a reference, the i5-4200U gets a score of 57.8 k points while the E5-2680 v3 gets 426.6 k points.
Summarizing, the E5-2680 v3 is 7.4 times faster than the i5-4200U . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
40651
306f2
Core
Haswell
Haswell-EP
Base frecuency
1.6 GHz
2.5 GHz
Boost frecuency
2.6 GHz
3.3 GHz
Socket
BGA1168
LGA 2011-3
Cores/Threads
2 /4
12/24
TDP
15 W
120 W
Cache L1 (d+i)
2x32+2x32 kB
12x32+12x32 kB
Cache L2
2x256 kB
12x256 kB
Cache L3
3072 kB
30720 kB
Date
June 2013
September 2014
Mean monothread perf.
28.85k points
36.31k points
Mean multithread perf.
57.84k points
426.58k points
AVX2 optimized benchmark
The benchmark in mode III (AVX2), like AVX1, is optimized to used 256 bits registers beside the second version of the Advanced Vector Extensions (AVX). The first AVX2 compatible CPU was released in 2013.
Monothread
i5-4200U
E5-2680 v3
Test#1 (Integers)
14.74k
18.86k (x1.28)
Test#2 (FP)
7.75k
10.06k (x1.3)
Test#3 (Generic, ZIP)
3.27k
4.14k (x1.26)
Test#1 (Memory)
3.09k
3.24k (x1.05)
TOTAL
28.85k
36.31k (x1.26)
Multithread
i5-4200U
E5-2680 v3
Test#1 (Integers)
27.66k
218.93k (x7.91)
Test#2 (FP)
18.65k
139.75k (x7.49)
Test#3 (Generic, ZIP)
7.17k
55.47k (x7.74)
Test#1 (Memory)
4.36k
12.42k (x2.85)
TOTAL
57.84k
426.58k (x7.38)
Performance/W
i5-4200U
E5-2680 v3
Test#1 (Integers)
1844 points/W
1824 points/W
Test#2 (FP)
1243 points/W
1165 points/W
Test#3 (Generic, ZIP)
478 points/W
462 points/W
Test#1 (Memory)
291 points/W
103 points/W
TOTAL
3856 points/W
3555 points/W
Performance/GHz
i5-4200U
E5-2680 v3
Test#1 (Integers)
5669 points/GHz
5716 points/GHz
Test#2 (FP)
2980 points/GHz
3049 points/GHz
Test#3 (Generic, ZIP)
1260 points/GHz
1254 points/GHz
Test#1 (Memory)
1187 points/GHz
983 points/GHz
TOTAL
11095 points/GHz
11002 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4