Core i5-3317U vs Celeron G1610T
Description
Both models i5-3317U and G1610T are based on Ivy Bridge architecture.
"Ivy Bridge is the last Intel microarchitecture for which there is official driver support for Windows XP . It is made under 22 nm Tri-Gate transistor (""3D"") technology and is basically a Sandy Bridge shrink. It has PCI Express 3.0 support and RdRand instruction for security tasks."
Using the multithread performance as a reference, the i5-3317U gets a score of 45.2 k points while the G1610T gets 38.6 k points.
Summarizing, the i5-3317U is 1.2 times faster than the G1610T . To get a proper comparison between both models, take a look to the data shown below.
"Ivy Bridge is the last Intel microarchitecture for which there is official driver support for Windows XP . It is made under 22 nm Tri-Gate transistor (""3D"") technology and is basically a Sandy Bridge shrink. It has PCI Express 3.0 support and RdRand instruction for security tasks."
Using the multithread performance as a reference, the i5-3317U gets a score of 45.2 k points while the G1610T gets 38.6 k points.
Summarizing, the i5-3317U is 1.2 times faster than the G1610T . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
306a9
306a9
Core
Ivy Bridge
Ivy Bridge
Base frecuency
1.7 GHz
2.3 GHz
Boost frecuency
2.6 GHz
2.3 GHz
Socket
BGA1023
LGA 1155
Cores/Threads
2 /2
2/2
TDP
17 W
35 W
Cache L1 (d+i)
2x32+2x32 kB
32+32 kB
Cache L2
2x256 kB
256 kB
Cache L3
3072 kB
2048 kB
Date
June 2012
December 2012
Mean monothread perf.
17.88k points
20.84k points
Mean multithread perf.
41.31k points
38.59k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
i5-3317U
G1610T
Test#1 (Integers)
2.5k
2.34k (x0.94)
Test#2 (FP)
7.18k
6.54k (x0.91)
Test#3 (Generic, ZIP)
3.19k
3k (x0.94)
Test#1 (Memory)
3.41k
2.74k (x0.8)
TOTAL
16.27k
14.62k (x0.9)
Multithread
i5-3317U
G1610T
Test#1 (Integers)
4.93k
4.67k (x0.95)
Test#2 (FP)
15.72k
12.66k (x0.81)
Test#3 (Generic, ZIP)
7.53k
5.95k (x0.79)
Test#1 (Memory)
4.21k
2.53k (x0.6)
TOTAL
32.39k
25.8k (x0.8)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
i5-3317U
G1610T
Test#1 (Integers)
8.38k
7.87k (x0.94)
Test#2 (FP)
7.76k
7.14k (x0.92)
Test#3 (Generic, ZIP)
3.33k
3.04k (x0.91)
Test#1 (Memory)
3.41k
2.79k (x0.82)
TOTAL
22.88k
20.84k (x0.91)
Multithread
i5-3317U
G1610T
Test#1 (Integers)
16.56k
15.12k (x0.91)
Test#2 (FP)
16.79k
14.05k (x0.84)
Test#3 (Generic, ZIP)
7.85k
5.94k (x0.76)
Test#1 (Memory)
4.02k
3.48k (x0.87)
TOTAL
45.23k
38.59k (x0.85)
Performance/W
i5-3317U
G1610T
Test#1 (Integers)
974 points/W
432 points/W
Test#2 (FP)
988 points/W
401 points/W
Test#3 (Generic, ZIP)
462 points/W
170 points/W
Test#1 (Memory)
237 points/W
99 points/W
TOTAL
2660 points/W
1103 points/W
Performance/GHz
i5-3317U
G1610T
Test#1 (Integers)
3225 points/GHz
3423 points/GHz
Test#2 (FP)
2984 points/GHz
3102 points/GHz
Test#3 (Generic, ZIP)
1281 points/GHz
1323 points/GHz
Test#1 (Memory)
1311 points/GHz
1211 points/GHz
TOTAL
8801 points/GHz
9060 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4