Core i5-2410M vs Xeon E5-2690 0
Description
Both models i5-2410M and E5-2690 0 are based on Sandy Bridge architecture.
"Sandy Bridge codename was originally ""Gesher"". The development began in 2005 and four years later, the first Sandy Bridge CPU was presented. The most prominent features are Intel Turbo Boost 2.0, AES encryption and SHA-1 hashing acceleration, Advanced Vector Extensions (AVX) 256-bit instruction set and the ability to have up to 8 physical cores or 16 logical cores through Hyper-Threading."
Using the multithread performance as a reference, the i5-2410M gets a score of 38.7 k points while the E5-2690 0 gets 185.3 k points.
Summarizing, the E5-2690 0 is 4.8 times faster than the i5-2410M . To get a proper comparison between both models, take a look to the data shown below.
"Sandy Bridge codename was originally ""Gesher"". The development began in 2005 and four years later, the first Sandy Bridge CPU was presented. The most prominent features are Intel Turbo Boost 2.0, AES encryption and SHA-1 hashing acceleration, Advanced Vector Extensions (AVX) 256-bit instruction set and the ability to have up to 8 physical cores or 16 logical cores through Hyper-Threading."
Using the multithread performance as a reference, the i5-2410M gets a score of 38.7 k points while the E5-2690 0 gets 185.3 k points.
Summarizing, the E5-2690 0 is 4.8 times faster than the i5-2410M . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
206a7
206d7
Core
Sandy Bridge
Sandy Bridge-EP
Base frecuency
2.3 GHz
2.9 GHz
Boost frecuency
2.9 GHz
3.8 GHz
Socket
Socket G2 (988B)
LGA 2011
Cores/Threads
2/2
8 /16
TDP
35 W
135 W
Cache L1 (d+i)
2x32+2x32 kB
8x32+8x32 kB
Cache L2
2x256 kB
8x256 kB
Cache L3
3072 kB
20480 kB
Date
February 2011
March 2012
Mean monothread perf.
20.1k points
23.28k points
Mean multithread perf.
38.68k points
185.26k points
AVX optimized benchmark
The benchmark in mode II (AVX) is optimized to used 256 bits registers beside the first version of the Advanced Vector Extensions (AVX). The first AVX compatible CPU was released in 2011.
Monothread
i5-2410M
E5-2690 0
Test#1 (Integers)
7.38k
8.76k (x1.19)
Test#2 (FP)
6.76k
7.35k (x1.09)
Test#3 (Generic, ZIP)
3.3k
3.86k (x1.17)
Test#1 (Memory)
2.66k
3.32k (x1.25)
TOTAL
20.1k
23.28k (x1.16)
Multithread
i5-2410M
E5-2690 0
Test#1 (Integers)
14.17k
78.51k (x5.54)
Test#2 (FP)
14.71k
66.46k (x4.52)
Test#3 (Generic, ZIP)
6.93k
36.42k (x5.25)
Test#1 (Memory)
2.87k
3.88k (x1.35)
TOTAL
38.68k
185.26k (x4.79)
Performance/W
i5-2410M
E5-2690 0
Test#1 (Integers)
405 points/W
582 points/W
Test#2 (FP)
420 points/W
492 points/W
Test#3 (Generic, ZIP)
198 points/W
270 points/W
Test#1 (Memory)
82 points/W
29 points/W
TOTAL
1105 points/W
1372 points/W
Performance/GHz
i5-2410M
E5-2690 0
Test#1 (Integers)
2543 points/GHz
2305 points/GHz
Test#2 (FP)
2332 points/GHz
1933 points/GHz
Test#3 (Generic, ZIP)
1139 points/GHz
1015 points/GHz
Test#1 (Memory)
917 points/GHz
874 points/GHz
TOTAL
6932 points/GHz
6127 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4