Core i3-6100T vs i7-4702MQ
Description
The i3-6100T is based on Skylake architecture while the i7-4702MQ is based on Haswell.
Using the multithread performance as a reference, the i3-6100T gets a score of 105.2 k points while the i7-4702MQ gets 145.1 k points.
Summarizing, the i7-4702MQ is 1.4 times faster than the i3-6100T. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the i3-6100T gets a score of 105.2 k points while the i7-4702MQ gets 145.1 k points.
Summarizing, the i7-4702MQ is 1.4 times faster than the i3-6100T. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
506e3
306c3
Core
Skylake-S
Haswell
Base frecuency
3.2 GHz
2.2 GHz
Boost frecuency
3.2 GHz
3.2 GHz
Socket
LGA 1151
Socket G3
Cores/Threads
2/4
4 /8
TDP
35 W
37 W
Cache L1 (d+i)
2x32+2x32 kB
4x32+4x32 kB
Cache L2
2x256 kB
4x256 kB
Cache L3
3072 kB
8192 kB
Date
November 2015
May 2013
Mean monothread perf.
43.92k points
36.8k points
Mean multithread perf.
105.21k points
145.15k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
i3-6100T
i7-4702MQ
Test#1 (Integers)
3.14k
3.45k (x1.1)
Test#2 (FP)
12.26k
8.53k (x0.7)
Test#3 (Generic, ZIP)
3.94k
3.99k (x1.01)
Test#1 (Memory)
2.21k
3.51k (x1.59)
TOTAL
21.55k
19.47k (x0.9)
Multithread
i3-6100T
i7-4702MQ
Test#1 (Integers)
6.52k
11.93k (x1.83)
Test#2 (FP)
30.61k
42.4k (x1.39)
Test#3 (Generic, ZIP)
10.59k
18k (x1.7)
Test#1 (Memory)
2.77k
3.6k (x1.3)
TOTAL
50.49k
75.92k (x1.5)
AVX2 optimized benchmark
The benchmark in mode III (AVX2), like AVX1, is optimized to used 256 bits registers beside the second version of the Advanced Vector Extensions (AVX). The first AVX2 compatible CPU was released in 2013.
Monothread
i3-6100T
i7-4702MQ
Test#1 (Integers)
19.58k
18.98k (x0.97)
Test#2 (FP)
16.97k
9.5k (x0.56)
Test#3 (Generic, ZIP)
3.91k
4.32k (x1.11)
Test#1 (Memory)
3.47k
3.99k (x1.15)
TOTAL
43.92k
36.8k (x0.84)
Multithread
i3-6100T
i7-4702MQ
Test#1 (Integers)
47.02k
74.75k (x1.59)
Test#2 (FP)
44.41k
47.72k (x1.07)
Test#3 (Generic, ZIP)
9.93k
19.65k (x1.98)
Test#1 (Memory)
3.85k
3.02k (x0.78)
TOTAL
105.21k
145.15k (x1.38)
Performance/W
i3-6100T
i7-4702MQ
Test#1 (Integers)
1344 points/W
2020 points/W
Test#2 (FP)
1269 points/W
1290 points/W
Test#3 (Generic, ZIP)
284 points/W
531 points/W
Test#1 (Memory)
110 points/W
82 points/W
TOTAL
3006 points/W
3923 points/W
Performance/GHz
i3-6100T
i7-4702MQ
Test#1 (Integers)
6119 points/GHz
5932 points/GHz
Test#2 (FP)
5303 points/GHz
2968 points/GHz
Test#3 (Generic, ZIP)
1221 points/GHz
1351 points/GHz
Test#1 (Memory)
1084 points/GHz
1248 points/GHz
TOTAL
13726 points/GHz
11499 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4