Celeron J1900 vs Core i3-6006U
Description
The J1900 is based on Silvermont architecture while the i3-6006U is based on Skylake.
Using the multithread performance as a reference, the J1900 gets a score of 33.2 k points while the i3-6006U gets 47.5 k points.
Summarizing, the i3-6006U is 1.4 times faster than the J1900. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the J1900 gets a score of 33.2 k points while the i3-6006U gets 47.5 k points.
Summarizing, the i3-6006U is 1.4 times faster than the J1900. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
30679
406e3
Core
Bay Trail-D
Skylake-U
Base frecuency
2 GHz
2 GHz
Boost frecuency
2.42 GHz
2 GHz
Socket
BGA 1170
BGA1356
Cores/Threads
4/4
2/4
TDP
10 W
15 W
Cache L1 (d+i)
4x32+4x24 kB
2x32+2x32 kB
Cache L2
2x1024 kB
2x256 kB
Cache L3
0 kB
3072 kB
Date
November 2013
November 2016
Mean monothread perf.
9.75k points
30.66k points
Mean multithread perf.
33.25k points
67.91k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
J1900
i3-6006U
Test#1 (Integers)
1.24k
2.02k (x1.63)
Test#2 (FP)
1.77k
8.2k (x4.64)
Test#3 (Generic, ZIP)
1.65k
2.63k (x1.59)
Test#1 (Memory)
1.15k
3.92k (x3.43)
TOTAL
5.81k
16.77k (x2.89)
Multithread
J1900
i3-6006U
Test#1 (Integers)
4.68k
3.83k (x0.82)
Test#2 (FP)
6.67k
17.17k (x2.57)
Test#3 (Generic, ZIP)
6.15k
5.77k (x0.94)
Test#1 (Memory)
1.45k
3.62k (x2.49)
TOTAL
18.96k
30.39k (x1.6)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
J1900
i3-6006U
Test#1 (Integers)
4.58k
7.28k (x1.59)
Test#2 (FP)
2.32k
10.51k (x4.54)
Test#3 (Generic, ZIP)
1.72k
2.81k (x1.64)
Test#1 (Memory)
1.14k
2.88k (x2.54)
TOTAL
9.75k
23.48k (x2.41)
Multithread
J1900
i3-6006U
Test#1 (Integers)
17.16k
14.98k (x0.87)
Test#2 (FP)
8.42k
23.68k (x2.81)
Test#3 (Generic, ZIP)
6.22k
6.37k (x1.02)
Test#1 (Memory)
1.44k
2.43k (x1.69)
TOTAL
33.25k
47.46k (x1.43)
Performance/W
J1900
i3-6006U
Test#1 (Integers)
1716 points/W
998 points/W
Test#2 (FP)
842 points/W
1579 points/W
Test#3 (Generic, ZIP)
622 points/W
425 points/W
Test#1 (Memory)
144 points/W
162 points/W
TOTAL
3325 points/W
3164 points/W
Performance/GHz
J1900
i3-6006U
Test#1 (Integers)
1893 points/GHz
3640 points/GHz
Test#2 (FP)
957 points/GHz
5255 points/GHz
Test#3 (Generic, ZIP)
709 points/GHz
1404 points/GHz
Test#1 (Memory)
470 points/GHz
1441 points/GHz
TOTAL
4029 points/GHz
11739 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4