Celeron G530 vs Xeon E5-4640
Description
Both models G530 and E5-4640 are based on Sandy Bridge architecture.
"Sandy Bridge codename was originally ""Gesher"". The development began in 2005 and four years later, the first Sandy Bridge CPU was presented. The most prominent features are Intel Turbo Boost 2.0, AES encryption and SHA-1 hashing acceleration, Advanced Vector Extensions (AVX) 256-bit instruction set and the ability to have up to 8 physical cores or 16 logical cores through Hyper-Threading."
Using the multithread performance as a reference, the G530 gets a score of 27 k points while the E5-4640 gets 581.6 k points.
Summarizing, the E5-4640 is 21.5 times faster than the G530. To get a proper comparison between both models, take a look to the data shown below.
"Sandy Bridge codename was originally ""Gesher"". The development began in 2005 and four years later, the first Sandy Bridge CPU was presented. The most prominent features are Intel Turbo Boost 2.0, AES encryption and SHA-1 hashing acceleration, Advanced Vector Extensions (AVX) 256-bit instruction set and the ability to have up to 8 physical cores or 16 logical cores through Hyper-Threading."
Using the multithread performance as a reference, the G530 gets a score of 27 k points while the E5-4640 gets 581.6 k points.
Summarizing, the E5-4640 is 21.5 times faster than the G530. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
206a7
206d7
Core
Sandy Bridge
Sandy Bridge-EP
Base frecuency
2.4 GHz
2.4 GHz
Boost frecuency
2.4 GHz
2.8 GHz
Socket
LGA 1155
LGA 2011
Cores/Threads
2/2
8 /16
TDP
65 W
95 W
Cache L1 (d+i)
2x32+2x32 kB
8x32+8x32 kB
Cache L2
2x256 kB
8x256 kB
Cache L3
2048 kB
20480 kB
Date
September 2011
May 2012
Mean monothread perf.
18.1k points
13.88k points
Mean multithread perf.
26.95k points
610.16k points
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
G530
E5-4640
Test#1 (Integers)
7.16k
6.19k (x0.86)
Test#2 (FP)
5.62k
5.89k (x1.05)
Test#3 (Generic, ZIP)
2.85k
2.11k (x0.74)
Test#1 (Memory)
2.46k
2.51k (x1.02)
TOTAL
18.1k
16.7k (x0.92)
Multithread
G530
E5-4640
Test#1 (Integers)
11.78k
244.88k (x20.79)
Test#2 (FP)
9.28k
215.35k (x23.2)
Test#3 (Generic, ZIP)
3.59k
114.64k (x31.95)
Test#1 (Memory)
2.3k
6.76k (x2.94)
TOTAL
26.95k
581.63k (x21.58)
Performance/W
G530
E5-4640
Test#1 (Integers)
181 points/W
2578 points/W
Test#2 (FP)
143 points/W
2267 points/W
Test#3 (Generic, ZIP)
55 points/W
1207 points/W
Test#1 (Memory)
35 points/W
71 points/W
TOTAL
415 points/W
6122 points/W
Performance/GHz
G530
E5-4640
Test#1 (Integers)
2985 points/GHz
2210 points/GHz
Test#2 (FP)
2343 points/GHz
2105 points/GHz
Test#3 (Generic, ZIP)
1187 points/GHz
755 points/GHz
Test#1 (Memory)
1026 points/GHz
895 points/GHz
TOTAL
7541 points/GHz
5966 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4