Celeron G1610T vs Xeon E3-1230 v5
Description
The G1610T is based on Ivy Bridge architecture while the E3-1230 v5 is based on Skylake.
Using the multithread performance as a reference, the G1610T gets a score of 38.6 k points while the E3-1230 v5 gets 37.9 k points.
Summarizing, the G1610T is 1 times faster than the E3-1230 v5. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the G1610T gets a score of 38.6 k points while the E3-1230 v5 gets 37.9 k points.
Summarizing, the G1610T is 1 times faster than the E3-1230 v5. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
306a9
506e3
Core
Ivy Bridge
Skylake-S
Base frecuency
2.3 GHz
3.4 GHz
Boost frecuency
2.3 GHz
3.8 GHz
Socket
LGA 1155
LGA 1151
Cores/Threads
2/2
4/8
TDP
35 W
80 W
Cache L1 (d+i)
32+32 kB
4x32+4x32 kB
Cache L2
256 kB
4x256 kB
Cache L3
2048 kB
8192 kB
Date
December 2012
October 2015
Mean monothread perf.
20.84k points
9.52k points
Mean multithread perf.
38.59k points
37.88k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
G1610T
E3-1230 v5
Test#1 (Integers)
2.34k
0.7k (x0.3)
Test#2 (FP)
6.54k
2.8k (x0.43)
Test#3 (Generic, ZIP)
3k
0.85k (x0.28)
Test#1 (Memory)
2.74k
1.88k (x0.69)
TOTAL
14.62k
6.23k (x0.43)
Multithread
G1610T
E3-1230 v5
Test#1 (Integers)
4.67k
2.74k (x0.59)
Test#2 (FP)
12.66k
12.87k (x1.02)
Test#3 (Generic, ZIP)
5.95k
3.89k (x0.65)
Test#1 (Memory)
2.53k
6.03k (x2.39)
TOTAL
25.8k
25.52k (x0.99)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
G1610T
E3-1230 v5
Test#1 (Integers)
7.87k
2.59k (x0.33)
Test#2 (FP)
7.14k
3.94k (x0.55)
Test#3 (Generic, ZIP)
3.04k
1k (x0.33)
Test#1 (Memory)
2.79k
2k (x0.72)
TOTAL
20.84k
9.52k (x0.46)
Multithread
G1610T
E3-1230 v5
Test#1 (Integers)
15.12k
10.4k (x0.69)
Test#2 (FP)
14.05k
16.64k (x1.18)
Test#3 (Generic, ZIP)
5.94k
4.51k (x0.76)
Test#1 (Memory)
3.48k
6.33k (x1.82)
TOTAL
38.59k
37.88k (x0.98)
Performance/W
G1610T
E3-1230 v5
Test#1 (Integers)
432 points/W
130 points/W
Test#2 (FP)
401 points/W
208 points/W
Test#3 (Generic, ZIP)
170 points/W
56 points/W
Test#1 (Memory)
99 points/W
79 points/W
TOTAL
1103 points/W
474 points/W
Performance/GHz
G1610T
E3-1230 v5
Test#1 (Integers)
3423 points/GHz
681 points/GHz
Test#2 (FP)
3102 points/GHz
1037 points/GHz
Test#3 (Generic, ZIP)
1323 points/GHz
263 points/GHz
Test#1 (Memory)
1211 points/GHz
525 points/GHz
TOTAL
9060 points/GHz
2506 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4