E Series E-450 vs Core 2 Duo T6600
Description
The E-450 is based on Bobcat architecture while the T6600 is based on Core.
Using the multithread performance as a reference, the E-450 gets a score of 9.7 k points while the T6600 gets 20.6 k points.
Summarizing, the T6600 is 2.1 times faster than the E-450. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the E-450 gets a score of 9.7 k points while the T6600 gets 20.6 k points.
Summarizing, the T6600 is 2.1 times faster than the E-450. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
500f20
1067a
Core
Zacate
Penryn-3M
Base frecuency
1.65 GHz
2.2 GHz
Socket
Socket FT1
Socket P
Cores/Threads
2/2
2/2
TDP
18 W
35 W
Cache L1 (d+i)
kB
2x32+2x32 kB
Cache L2
2x512 kB
2048 kB
Cache L3
0 kB
kB
Date
August 2011
January 2009
Mean monothread perf.
6.51k points
11.15k points
Mean multithread perf.
9.65k points
20.63k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
E-450
T6600
Test#1 (Integers)
0.85k
2.01k (x2.36)
Test#2 (FP)
2.47k
5.17k (x2.09)
Test#3 (Generic, ZIP)
1.47k
2.17k (x1.48)
Test#1 (Memory)
0.7k
0.75k (x1.08)
TOTAL
5.49k
10.1k (x1.84)
Multithread
E-450
T6600
Test#1 (Integers)
1.24k
3.88k (x3.12)
Test#2 (FP)
3.43k
9.84k (x2.86)
Test#3 (Generic, ZIP)
2.32k
4.17k (x1.8)
Test#1 (Memory)
0.69k
0.69k (x1.01)
TOTAL
7.68k
18.58k (x2.42)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
E-450
T6600
Test#1 (Integers)
1.82k
2.55k (x1.4)
Test#2 (FP)
2.57k
5.59k (x2.17)
Test#3 (Generic, ZIP)
1.46k
2.26k (x1.55)
Test#1 (Memory)
0.66k
0.75k (x1.14)
TOTAL
6.51k
11.15k (x1.71)
Multithread
E-450
T6600
Test#1 (Integers)
3.16k
4.9k (x1.55)
Test#2 (FP)
4.19k
10.71k (x2.55)
Test#3 (Generic, ZIP)
1.73k
4.33k (x2.51)
Test#1 (Memory)
0.58k
0.69k (x1.2)
TOTAL
9.65k
20.63k (x2.14)
Performance/W
E-450
T6600
Test#1 (Integers)
176 points/W
140 points/W
Test#2 (FP)
233 points/W
306 points/W
Test#3 (Generic, ZIP)
96 points/W
124 points/W
Test#1 (Memory)
32 points/W
20 points/W
TOTAL
536 points/W
589 points/W
Performance/GHz
E-450
T6600
Test#1 (Integers)
1105 points/GHz
1160 points/GHz
Test#2 (FP)
1557 points/GHz
2539 points/GHz
Test#3 (Generic, ZIP)
883 points/GHz
1028 points/GHz
Test#1 (Memory)
401 points/GHz
341 points/GHz
TOTAL
3947 points/GHz
5068 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4