Pentium E5200 (R0) vs Pentium Dual-Core T4500
Description
Both models E5200 (R0) and T4500 are based on Core architecture.
Using the multithread performance as a reference, the E5200 (R0) gets a score of 24.9 k points while the T4500 gets 22.7 k points.
Summarizing, the E5200 (R0) is 1.1 times faster than the T4500. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the E5200 (R0) gets a score of 24.9 k points while the T4500 gets 22.7 k points.
Summarizing, the E5200 (R0) is 1.1 times faster than the T4500. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
1067a
1067a
Core
Wolfdale
Penryn-3M
Base frecuency
2.5 GHz
2.3 GHz
Socket
LGA 775
Socket P
Cores/Threads
2/2
2/2
TDP
65 W
35 W
Cache L1 (d+i)
32+32 kB
32+32 kB
Cache L2
2048 kB
1024 kB
Date
August 2008
January 2010
Mean monothread perf.
13.08k points
12.06k points
Mean multithread perf.
24.89k points
22.71k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
E5200 (R0)
T4500
Test#1 (Integers)
2.3k
2.08k (x0.9)
Test#2 (FP)
5.9k
5.4k (x0.92)
Test#3 (Generic, ZIP)
2.47k
2.27k (x0.92)
Test#1 (Memory)
1.21k
1.21k (x1)
TOTAL
11.89k
10.96k (x0.92)
Multithread
E5200 (R0)
T4500
Test#1 (Integers)
4.63k
4.11k (x0.89)
Test#2 (FP)
10.62k
10.61k (x1)
Test#3 (Generic, ZIP)
4.95k
4.47k (x0.9)
Test#1 (Memory)
1.82k
1.33k (x0.73)
TOTAL
22.03k
20.52k (x0.93)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
E5200 (R0)
T4500
Test#1 (Integers)
2.87k
2.64k (x0.92)
Test#2 (FP)
6.42k
5.88k (x0.92)
Test#3 (Generic, ZIP)
2.58k
2.36k (x0.91)
Test#1 (Memory)
1.21k
1.19k (x0.98)
TOTAL
13.08k
12.06k (x0.92)
Multithread
E5200 (R0)
T4500
Test#1 (Integers)
5.74k
5.21k (x0.91)
Test#2 (FP)
12.78k
11.52k (x0.9)
Test#3 (Generic, ZIP)
5.18k
4.65k (x0.9)
Test#1 (Memory)
1.2k
1.33k (x1.11)
TOTAL
24.89k
22.71k (x0.91)
Performance/W
E5200 (R0)
T4500
Test#1 (Integers)
88 points/W
149 points/W
Test#2 (FP)
197 points/W
329 points/W
Test#3 (Generic, ZIP)
80 points/W
133 points/W
Test#1 (Memory)
18 points/W
38 points/W
TOTAL
383 points/W
649 points/W
Performance/GHz
E5200 (R0)
T4500
Test#1 (Integers)
1146 points/GHz
1147 points/GHz
Test#2 (FP)
2568 points/GHz
2555 points/GHz
Test#3 (Generic, ZIP)
1033 points/GHz
1026 points/GHz
Test#1 (Memory)
485 points/GHz
517 points/GHz
TOTAL
5232 points/GHz
5245 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4