Pentium E5200 (R0) vs Celeron 3855U
Description
The E5200 (R0) is based on Core architecture while the 3855U is based on Skylake.
Using the multithread performance as a reference, the E5200 (R0) gets a score of 24.9 k points while the 3855U gets 24.6 k points.
Summarizing, the E5200 (R0) is 1 times faster than the 3855U. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the E5200 (R0) gets a score of 24.9 k points while the 3855U gets 24.6 k points.
Summarizing, the E5200 (R0) is 1 times faster than the 3855U. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
1067a
406e3
Core
Wolfdale
Skylake-U
Base frecuency
2.5 GHz
1.6 GHz
Socket
LGA 775
BGA1356
Cores/Threads
2/2
2/2
TDP
65 W
15 W
Cache L1 (d+i)
32+32 kB
2x32+2x32 kB
Cache L2
2048 kB
2x256 kB
Cache L3
0 kB
2096 kB
Date
August 2008
December 2015
Mean monothread perf.
13.08k points
19.24k points
Mean multithread perf.
24.89k points
24.56k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
E5200 (R0)
3855U
Test#1 (Integers)
2.3k
1.64k (x0.71)
Test#2 (FP)
5.9k
6.72k (x1.14)
Test#3 (Generic, ZIP)
2.47k
2.06k (x0.83)
Test#1 (Memory)
1.21k
2.4k (x1.98)
TOTAL
11.89k
12.83k (x1.08)
Multithread
E5200 (R0)
3855U
Test#1 (Integers)
4.63k
2.2k (x0.47)
Test#2 (FP)
10.62k
9.59k (x0.9)
Test#3 (Generic, ZIP)
4.95k
2.76k (x0.56)
Test#1 (Memory)
1.82k
2.27k (x1.24)
TOTAL
22.03k
16.81k (x0.76)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
E5200 (R0)
3855U
Test#1 (Integers)
2.87k
5.93k (x2.07)
Test#2 (FP)
6.42k
8.53k (x1.33)
Test#3 (Generic, ZIP)
2.58k
2.28k (x0.88)
Test#1 (Memory)
1.21k
2.5k (x2.06)
TOTAL
13.08k
19.24k (x1.47)
Multithread
E5200 (R0)
3855U
Test#1 (Integers)
5.74k
7.87k (x1.37)
Test#2 (FP)
12.78k
11.28k (x0.88)
Test#3 (Generic, ZIP)
5.18k
2.91k (x0.56)
Test#1 (Memory)
1.2k
2.5k (x2.08)
TOTAL
24.89k
24.56k (x0.99)
Performance/W
E5200 (R0)
3855U
Test#1 (Integers)
88 points/W
524 points/W
Test#2 (FP)
197 points/W
752 points/W
Test#3 (Generic, ZIP)
80 points/W
194 points/W
Test#1 (Memory)
18 points/W
166 points/W
TOTAL
383 points/W
1637 points/W
Performance/GHz
E5200 (R0)
3855U
Test#1 (Integers)
1146 points/GHz
3706 points/GHz
Test#2 (FP)
2568 points/GHz
5333 points/GHz
Test#3 (Generic, ZIP)
1033 points/GHz
1423 points/GHz
Test#1 (Memory)
485 points/GHz
1562 points/GHz
TOTAL
5232 points/GHz
12024 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4