Xeon E5472 vs Core i3-6100
Description
The E5472 is based on Core architecture while the i3-6100 is based on Skylake.
Using the multithread performance as a reference, the E5472 gets a score of 48.6 k points while the i3-6100 gets 91.1 k points.
Summarizing, the i3-6100 is 1.9 times faster than the E5472. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the E5472 gets a score of 48.6 k points while the i3-6100 gets 91.1 k points.
Summarizing, the i3-6100 is 1.9 times faster than the E5472. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
10676
506e3
Core
Harpertown
Skylake-S
Base frecuency
3 GHz
3.7 GHz
Socket
LGA-771
LGA 1151
Cores/Threads
4/4
2/2
TDP
80 W
51 W
Cache L1 (d+i)
4x32+4x32 kB
32+32 kB
Cache L2
2x6144 kB
256 kB
Cache L3
kB
4096 kB
Date
November 2007
September 2015
Mean monothread perf.
16.62k points
52.84k points
Mean multithread perf.
48.62k points
112.28k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
E5472
i3-6100
Test#1 (Integers)
2.29k
3.81k (x1.67)
Test#2 (FP)
5.85k
15.65k (x2.68)
Test#3 (Generic, ZIP)
2.44k
5.14k (x2.11)
Test#1 (Memory)
4.81k
4.28k (x0.89)
TOTAL
15.39k
28.89k (x1.88)
Multithread
E5472
i3-6100
Test#1 (Integers)
9.06k
7.75k (x0.86)
Test#2 (FP)
23.09k
37.33k (x1.62)
Test#3 (Generic, ZIP)
9.7k
12.13k (x1.25)
Test#1 (Memory)
2.53k
3.56k (x1.41)
TOTAL
44.38k
60.77k (x1.37)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
E5472
i3-6100
Test#1 (Integers)
2.88k
13.76k (x4.77)
Test#2 (FP)
6.36k
19.96k (x3.14)
Test#3 (Generic, ZIP)
2.55k
5.44k (x2.13)
Test#1 (Memory)
4.83k
4.4k (x0.91)
TOTAL
16.62k
43.55k (x2.62)
Multithread
E5472
i3-6100
Test#1 (Integers)
11.19k
28.99k (x2.59)
Test#2 (FP)
24.85k
45.75k (x1.84)
Test#3 (Generic, ZIP)
10.04k
12.72k (x1.27)
Test#1 (Memory)
2.54k
3.68k (x1.45)
TOTAL
48.62k
91.14k (x1.87)
Performance/W
E5472
i3-6100
Test#1 (Integers)
140 points/W
568 points/W
Test#2 (FP)
311 points/W
897 points/W
Test#3 (Generic, ZIP)
125 points/W
249 points/W
Test#1 (Memory)
32 points/W
72 points/W
TOTAL
608 points/W
1787 points/W
Performance/GHz
E5472
i3-6100
Test#1 (Integers)
961 points/GHz
3719 points/GHz
Test#2 (FP)
2119 points/GHz
5393 points/GHz
Test#3 (Generic, ZIP)
850 points/GHz
1469 points/GHz
Test#1 (Memory)
1610 points/GHz
1189 points/GHz
TOTAL
5539 points/GHz
11770 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4