Xeon E5-2697 v2 vs Core i7-10510U
Description
The E5-2697 v2 is based on Ivy Bridge architecture while the i7-10510U is based on Comet Lake.
Using the multithread performance as a reference, the E5-2697 v2 gets a score of 633.1 k points while the i7-10510U gets 169.1 k points.
Summarizing, the E5-2697 v2 is 3.7 times faster than the i7-10510U. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the E5-2697 v2 gets a score of 633.1 k points while the i7-10510U gets 169.1 k points.
Summarizing, the E5-2697 v2 is 3.7 times faster than the i7-10510U. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
306e4
806ec
Core
Ivy Bridge-EP
Comet Lake-U
Base frecuency
2.7 GHz
1.8 GHz
Boost frecuency
3.5 GHz
4.9 GHz
Socket
LGA 2011
BGA 1528
Cores/Threads
12 /24
4/8
TDP
130 W
15 W
Cache L1 (d+i)
12x32+12x32 kB
4x32+4x32 kB
Cache L2
12x256 kB
4x256 kB
Cache L3
30720 kB
8192 kB
Date
September 2013
August 2019
Mean monothread perf.
27.92k points
59.01k points
Mean multithread perf.
633.14k points
190.82k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
E5-2697 v2
i7-10510U
Test#1 (Integers)
3.44k
4.91k (x1.43)
Test#2 (FP)
9.54k
20.01k (x2.1)
Test#3 (Generic, ZIP)
4.21k
6.05k (x1.44)
Test#1 (Memory)
3.94k
14.16k (x3.59)
TOTAL
21.13k
45.13k (x2.14)
Multithread
E5-2697 v2
i7-10510U
Test#1 (Integers)
73.17k
13.79k (x0.19)
Test#2 (FP)
230.83k
70.21k (x0.3)
Test#3 (Generic, ZIP)
107.14k
20.05k (x0.19)
Test#1 (Memory)
7.99k
8.04k (x1.01)
TOTAL
419.12k
112.09k (x0.27)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
E5-2697 v2
i7-10510U
Test#1 (Integers)
10.64k
17.66k (x1.66)
Test#2 (FP)
9.53k
25.46k (x2.67)
Test#3 (Generic, ZIP)
4.12k
6.4k (x1.55)
Test#1 (Memory)
3.62k
14.05k (x3.89)
TOTAL
27.91k
63.57k (x2.28)
Multithread
E5-2697 v2
i7-10510U
Test#1 (Integers)
252.69k
54.45k (x0.22)
Test#2 (FP)
238.68k
84.97k (x0.36)
Test#3 (Generic, ZIP)
115.5k
21.26k (x0.18)
Test#1 (Memory)
10.98k
8.04k (x0.73)
TOTAL
617.84k
168.72k (x0.27)
AVX optimized benchmark
The benchmark in mode II (AVX) is optimized to used 256 bits registers beside the first version of the Advanced Vector Extensions (AVX). The first AVX compatible CPU was released in 2011.
Monothread
E5-2697 v2
i7-10510U
Test#1 (Integers)
10.53k
17.52k (x1.66)
Test#2 (FP)
9.98k
26.74k (x2.68)
Test#3 (Generic, ZIP)
4k
6.22k (x1.55)
Test#1 (Memory)
3.4k
13.33k (x3.91)
TOTAL
27.92k
63.81k (x2.29)
Multithread
E5-2697 v2
i7-10510U
Test#1 (Integers)
247.05k
54.53k (x0.22)
Test#2 (FP)
264.43k
85.61k (x0.32)
Test#3 (Generic, ZIP)
111.01k
20.87k (x0.19)
Test#1 (Memory)
10.66k
8.05k (x0.76)
TOTAL
633.14k
169.07k (x0.27)
Performance/W
E5-2697 v2
i7-10510U
Test#1 (Integers)
1900 points/W
3635 points/W
Test#2 (FP)
2034 points/W
5707 points/W
Test#3 (Generic, ZIP)
854 points/W
1391 points/W
Test#1 (Memory)
82 points/W
537 points/W
TOTAL
4870 points/W
11271 points/W
Performance/GHz
E5-2697 v2
i7-10510U
Test#1 (Integers)
3007 points/GHz
3576 points/GHz
Test#2 (FP)
2852 points/GHz
5457 points/GHz
Test#3 (Generic, ZIP)
1144 points/GHz
1269 points/GHz
Test#1 (Memory)
973 points/GHz
2720 points/GHz
TOTAL
7976 points/GHz
13022 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4