Pentium Dual-Core E2200 vs Core i7-860
Description
The E2200 is based on Core architecture while the i7-860 is based on Nehalem.
Using the multithread performance as a reference, the E2200 gets a score of 15.4 k points while the i7-860 gets 75.4 k points.
Summarizing, the i7-860 is 4.9 times faster than the E2200 . To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the E2200 gets a score of 15.4 k points while the i7-860 gets 75.4 k points.
Summarizing, the i7-860 is 4.9 times faster than the E2200 . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
6fd
106e5
Core
Allendale
Lynnfield
Base frecuency
2.2 GHz
2.8 GHz
Boost frecuency
2.2 GHz
3.467 GHz
Socket
LGA 775
LGA 1156
Cores/Threads
2/2
4/8
TDP
65 W
95 W
Cache L1 (d+i)
2x32+2x32 kB
4x32+4x32 kB
Cache L2
1024 kB
4x256 kB
Cache L3
0 kB
8192 kB
Date
December 2007
September 2009
Mean monothread perf.
8.29k points
19.19k points
Mean multithread perf.
15.44k points
75.43k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
E2200
i7-860
Test#1 (Integers)
2.22k
2.15k (x0.97)
Test#2 (FP)
2.22k
4.87k (x2.2)
Test#3 (Generic, ZIP)
2.22k
2.82k (x1.27)
Test#1 (Memory)
1.17k
3.13k (x2.68)
TOTAL
7.81k
12.97k (x1.66)
Multithread
E2200
i7-860
Test#1 (Integers)
4.41k
8.24k (x1.87)
Test#2 (FP)
4.42k
21.63k (x4.89)
Test#3 (Generic, ZIP)
4.45k
14.65k (x3.3)
Test#1 (Memory)
1.18k
5.02k (x4.25)
TOTAL
14.45k
49.54k (x3.43)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
E2200
i7-860
Test#1 (Integers)
2.53k
7.87k (x3.12)
Test#2 (FP)
2.3k
5.25k (x2.29)
Test#3 (Generic, ZIP)
2.31k
2.94k (x1.27)
Test#1 (Memory)
1.16k
3.13k (x2.68)
TOTAL
8.29k
19.19k (x2.31)
Multithread
E2200
i7-860
Test#1 (Integers)
5.06k
31.5k (x6.23)
Test#2 (FP)
4.58k
23.47k (x5.12)
Test#3 (Generic, ZIP)
4.61k
15.47k (x3.35)
Test#1 (Memory)
1.18k
4.98k (x4.21)
TOTAL
15.44k
75.43k (x4.89)
Performance/W
E2200
i7-860
Test#1 (Integers)
78 points/W
332 points/W
Test#2 (FP)
70 points/W
247 points/W
Test#3 (Generic, ZIP)
71 points/W
163 points/W
Test#1 (Memory)
18 points/W
52 points/W
TOTAL
237 points/W
794 points/W
Performance/GHz
E2200
i7-860
Test#1 (Integers)
1149 points/GHz
2271 points/GHz
Test#2 (FP)
1044 points/GHz
1514 points/GHz
Test#3 (Generic, ZIP)
1048 points/GHz
847 points/GHz
Test#1 (Memory)
529 points/GHz
902 points/GHz
TOTAL
3770 points/GHz
5534 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4