Pentium G2020 vs Core i3-6100U
Description
The G2020 is based on Ivy Bridge architecture while the i3-6100U is based on Skylake.
Using the multithread performance as a reference, the G2020 gets a score of 42.4 k points while the i3-6100U gets 50.2 k points.
Summarizing, the i3-6100U is 1.2 times faster than the G2020 . To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the G2020 gets a score of 42.4 k points while the i3-6100U gets 50.2 k points.
Summarizing, the i3-6100U is 1.2 times faster than the G2020 . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
306a9
406e3
Core
Ivy Bridge
Skylake-U
Base frecuency
1.6 GHz
2.3 GHz
Boost frecuency
2.9 GHz
2.3 GHz
Socket
LGA 1155
BGA1356
Cores/Threads
2/2
2/4
TDP
55 W
15 W
Cache L1 (d+i)
32+32 kB
2x32+2x32 kB
Cache L2
256 kB
2x256 kB
Cache L3
3072 kB
3072 kB
Date
January 2013
September 2015
Mean monothread perf.
25.87k points
30.73k points
Mean multithread perf.
42.39k points
69.94k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
G2020
i3-6100U
Test#1 (Integers)
2.94k
2.27k (x0.77)
Test#2 (FP)
8.23k
9.18k (x1.11)
Test#3 (Generic, ZIP)
3.69k
2.97k (x0.8)
Test#1 (Memory)
2.46k
3.79k (x1.54)
TOTAL
17.33k
18.21k (x1.05)
Multithread
G2020
i3-6100U
Test#1 (Integers)
5.54k
4.79k (x0.86)
Test#2 (FP)
15.47k
23.04k (x1.49)
Test#3 (Generic, ZIP)
7.06k
7.55k (x1.07)
Test#1 (Memory)
2.99k
3.86k (x1.29)
TOTAL
31.05k
39.24k (x1.26)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
G2020
i3-6100U
Test#1 (Integers)
9.9k
7.99k (x0.81)
Test#2 (FP)
9.01k
11.82k (x1.31)
Test#3 (Generic, ZIP)
3.87k
2.97k (x0.77)
Test#1 (Memory)
3.09k
3.75k (x1.21)
TOTAL
25.87k
26.52k (x1.03)
Multithread
G2020
i3-6100U
Test#1 (Integers)
18.83k
15.44k (x0.82)
Test#2 (FP)
14.15k
23.79k (x1.68)
Test#3 (Generic, ZIP)
6.61k
6.93k (x1.05)
Test#1 (Memory)
2.81k
4.03k (x1.44)
TOTAL
42.39k
50.19k (x1.18)
Performance/W
G2020
i3-6100U
Test#1 (Integers)
342 points/W
1029 points/W
Test#2 (FP)
257 points/W
1586 points/W
Test#3 (Generic, ZIP)
120 points/W
462 points/W
Test#1 (Memory)
51 points/W
269 points/W
TOTAL
771 points/W
3346 points/W
Performance/GHz
G2020
i3-6100U
Test#1 (Integers)
3415 points/GHz
3474 points/GHz
Test#2 (FP)
3107 points/GHz
5137 points/GHz
Test#3 (Generic, ZIP)
1334 points/GHz
1290 points/GHz
Test#1 (Memory)
1065 points/GHz
1631 points/GHz
TOTAL
8921 points/GHz
11532 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4