Pentium 4 HT 630 vs Core 2 Duo E6300
Description
The 630 is based on NetBurst architecture while the E6300 is based on Core.
Using the multithread performance as a reference, the 630 gets a score of 9.1 k points while the E6300 gets 12 k points.
Summarizing, the E6300 is 1.3 times faster than the 630. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the 630 gets a score of 9.1 k points while the E6300 gets 12 k points.
Summarizing, the E6300 is 1.3 times faster than the 630. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
f43
6f2
Core
Prescott
Conroe
Base frecuency
3 GHz
1.866 GHz
Socket
LGA 775
LGA 775
Cores/Threads
1/2
2/2
TDP
84 W
65 W
Cache L1 (d+i)
16+8 kB
32+32 kB
Cache L2
2048 kB
4096 kB
Date
2005
July 2006
Mean monothread perf.
7.92k points
6.87k points
Mean multithread perf.
9.14k points
12.05k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
630
E6300
Test#1 (Integers)
1.56k
1.82k (x1.17)
Test#2 (FP)
2.78k
1.83k (x0.66)
Test#3 (Generic, ZIP)
1.34k
1.86k (x1.38)
Test#1 (Memory)
0.92k
1.24k (x1.35)
TOTAL
6.6k
6.75k (x1.02)
Multithread
630
E6300
Test#1 (Integers)
1.27k
3.51k (x2.76)
Test#2 (FP)
3.26k
3.59k (x1.1)
Test#3 (Generic, ZIP)
1.58k
3.49k (x2.21)
Test#1 (Memory)
0.9k
1.29k (x1.43)
TOTAL
7.01k
11.87k (x1.69)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
630
E6300
Test#1 (Integers)
2.1k
2.09k (x1)
Test#2 (FP)
3.33k
1.94k (x0.58)
Test#3 (Generic, ZIP)
1.58k
1.79k (x1.13)
Test#1 (Memory)
0.91k
1.05k (x1.15)
TOTAL
7.92k
6.87k (x0.87)
Multithread
630
E6300
Test#1 (Integers)
1.85k
3.65k (x1.98)
Test#2 (FP)
4.47k
3.76k (x0.84)
Test#3 (Generic, ZIP)
1.92k
3.61k (x1.88)
Test#1 (Memory)
0.9k
1.03k (x1.14)
TOTAL
9.14k
12.05k (x1.32)
Performance/W
630
E6300
Test#1 (Integers)
22 points/W
56 points/W
Test#2 (FP)
53 points/W
58 points/W
Test#3 (Generic, ZIP)
23 points/W
55 points/W
Test#1 (Memory)
11 points/W
16 points/W
TOTAL
109 points/W
185 points/W
Performance/GHz
630
E6300
Test#1 (Integers)
699 points/GHz
1121 points/GHz
Test#2 (FP)
1109 points/GHz
1038 points/GHz
Test#3 (Generic, ZIP)
527 points/GHz
961 points/GHz
Test#1 (Memory)
305 points/GHz
564 points/GHz
TOTAL
2640 points/GHz
3684 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4