Pentium 4 HT 521 vs C Series C-60
Description
The 521 is based on NetBurst architecture while the C-60 is based on Bobcat.
Using the multithread performance as a reference, the 521 gets a score of 8.4 k points while the C-60 gets 8.5 k points.
Summarizing, the C-60 is 1 times faster than the 521. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the 521 gets a score of 8.4 k points while the C-60 gets 8.5 k points.
Summarizing, the C-60 is 1 times faster than the 521. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
f49
500f20
Core
Prescott
Ontario
Base frecuency
2.8 GHz
1 GHz
Boost frecuency
2.8 GHz
1.33 GHz
Socket
LGA 775
Socket FT1
Cores/Threads
1/2
2/2
TDP
84 W
9 W
Cache L1 (d+i)
8+8 kB
kB
Cache L2
1024 kB
2x512 kB
Date
2004
August 2011
Mean monothread perf.
7.48k points
4.79k points
Mean multithread perf.
8.42k points
8.53k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
521
C-60
Test#1 (Integers)
1.45k
0.66k (x0.45)
Test#2 (FP)
2.6k
1.91k (x0.74)
Test#3 (Generic, ZIP)
1.26k
1.11k (x0.88)
Test#1 (Memory)
0.91k
0.52k (x0.57)
TOTAL
6.22k
4.2k (x0.67)
Multithread
521
C-60
Test#1 (Integers)
1.2k
0.89k (x0.74)
Test#2 (FP)
3.04k
2.67k (x0.88)
Test#3 (Generic, ZIP)
1.48k
1.53k (x1.03)
Test#1 (Memory)
0.9k
0.6k (x0.67)
TOTAL
6.62k
5.68k (x0.86)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
521
C-60
Test#1 (Integers)
1.96k
1.32k (x0.67)
Test#2 (FP)
3.12k
1.94k (x0.62)
Test#3 (Generic, ZIP)
1.49k
1.07k (x0.71)
Test#1 (Memory)
0.91k
0.45k (x0.5)
TOTAL
7.48k
4.79k (x0.64)
Multithread
521
C-60
Test#1 (Integers)
1.77k
2.36k (x1.34)
Test#2 (FP)
3.96k
3.52k (x0.89)
Test#3 (Generic, ZIP)
1.8k
1.92k (x1.06)
Test#1 (Memory)
0.9k
0.73k (x0.82)
TOTAL
8.42k
8.53k (x1.01)
Performance/W
521
C-60
Test#1 (Integers)
21 points/W
262 points/W
Test#2 (FP)
47 points/W
391 points/W
Test#3 (Generic, ZIP)
21 points/W
213 points/W
Test#1 (Memory)
11 points/W
81 points/W
TOTAL
100 points/W
948 points/W
Performance/GHz
521
C-60
Test#1 (Integers)
701 points/GHz
994 points/GHz
Test#2 (FP)
1113 points/GHz
1461 points/GHz
Test#3 (Generic, ZIP)
533 points/GHz
802 points/GHz
Test#1 (Memory)
325 points/GHz
342 points/GHz
TOTAL
2672 points/GHz
3599 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4