Core 2 Duo T5500 vs Celeron N3150
Description
The T5500 is based on Core architecture while the N3150 is based on Airmont.
Using the multithread performance as a reference, the T5500 gets a score of 11.8 k points while the N3150 gets 31.8 k points.
Summarizing, the N3150 is 2.7 times faster than the T5500 . To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the T5500 gets a score of 11.8 k points while the N3150 gets 31.8 k points.
Summarizing, the N3150 is 2.7 times faster than the T5500 . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
6f2
406c3
Core
Merom
Braswell
Base frecuency
1.667 GHz
1.6 GHz
Boost frecuency
1.66 GHz
2.08 GHz
Socket
Socket M
BGA1170
Cores/Threads
2/2
4/4
TDP
35 W
6 W
Cache L1 (d+i)
32+32 kB
4x32+4x24 kB
Cache L2
2048 kB
2x1024 kB
Cache L3
0 kB
kB
Date
July 2006
March 2015
Mean monothread perf.
6.41k points
9.21k points
Mean multithread perf.
11.81k points
31.8k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
T5500
N3150
Test#1 (Integers)
1.58k
1.07k (x0.68)
Test#2 (FP)
1.67k
1.74k (x1.04)
Test#3 (Generic, ZIP)
1.67k
1.5k (x0.9)
Test#1 (Memory)
0.96k
1.46k (x1.52)
TOTAL
5.89k
5.78k (x0.98)
Multithread
T5500
N3150
Test#1 (Integers)
3.18k
3.99k (x1.25)
Test#2 (FP)
3.28k
6.31k (x1.92)
Test#3 (Generic, ZIP)
3.23k
5.05k (x1.56)
Test#1 (Memory)
1.04k
2.65k (x2.54)
TOTAL
10.74k
18k (x1.68)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
T5500
N3150
Test#1 (Integers)
1.93k
3.91k (x2.03)
Test#2 (FP)
1.73k
2.29k (x1.32)
Test#3 (Generic, ZIP)
1.74k
1.57k (x0.9)
Test#1 (Memory)
1.01k
1.44k (x1.43)
TOTAL
6.41k
9.21k (x1.44)
Multithread
T5500
N3150
Test#1 (Integers)
3.84k
14.78k (x3.85)
Test#2 (FP)
3.43k
8.62k (x2.51)
Test#3 (Generic, ZIP)
3.45k
5.84k (x1.69)
Test#1 (Memory)
1.08k
2.57k (x2.38)
TOTAL
11.81k
31.8k (x2.69)
Performance/W
T5500
N3150
Test#1 (Integers)
110 points/W
2463 points/W
Test#2 (FP)
98 points/W
1437 points/W
Test#3 (Generic, ZIP)
99 points/W
973 points/W
Test#1 (Memory)
31 points/W
428 points/W
TOTAL
337 points/W
5300 points/W
Performance/GHz
T5500
N3150
Test#1 (Integers)
1163 points/GHz
1880 points/GHz
Test#2 (FP)
1043 points/GHz
1102 points/GHz
Test#3 (Generic, ZIP)
1049 points/GHz
755 points/GHz
Test#1 (Memory)
608 points/GHz
692 points/GHz
TOTAL
3863 points/GHz
4429 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4