Core i7-4702MQ vs i3-4030U
Description
Both models i7-4702MQ and i3-4030U are based on Haswell architecture.
"Haswell is known as fourth-generation core too. It uses 22nm Tri-Gate FinFET (non-planar, ""3D"") technology. It includes four arithmetic logic unit (ALU) and three address generation unit (AGU). This generation is able to run Advanced Vector Extensions 2 (AVX2) instruction set among BMI1, BMI2, ABM and FMA3. At this time, Intel used new sockets: LGA 1150 for desktops and BGA1364 for the mobile CPUs."
Using the multithread performance as a reference, the i7-4702MQ gets a score of 145.1 k points while the i3-4030U gets 46.1 k points.
Summarizing, the i7-4702MQ is 3.1 times faster than the i3-4030U. To get a proper comparison between both models, take a look to the data shown below.
"Haswell is known as fourth-generation core too. It uses 22nm Tri-Gate FinFET (non-planar, ""3D"") technology. It includes four arithmetic logic unit (ALU) and three address generation unit (AGU). This generation is able to run Advanced Vector Extensions 2 (AVX2) instruction set among BMI1, BMI2, ABM and FMA3. At this time, Intel used new sockets: LGA 1150 for desktops and BGA1364 for the mobile CPUs."
Using the multithread performance as a reference, the i7-4702MQ gets a score of 145.1 k points while the i3-4030U gets 46.1 k points.
Summarizing, the i7-4702MQ is 3.1 times faster than the i3-4030U. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
306c3
40651
Core
Haswell
Haswell
Base frecuency
2.2 GHz
1.9 GHz
Boost frecuency
3.2 GHz
1.9 GHz
Socket
Socket G3
BGA1168
Cores/Threads
4 /8
2/4
TDP
37 W
15 W
Cache L1 (d+i)
4x32+4x32 kB
2x32+2x32 kB
Cache L2
4x256 kB
2x256 kB
Cache L3
8192 kB
3072 kB
Date
May 2013
April 2014
Mean monothread perf.
36.8k points
21.57k points
Mean multithread perf.
145.15k points
46.09k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
i7-4702MQ
i3-4030U
Test#1 (Integers)
3.45k
2.14k (x0.62)
Test#2 (FP)
8.53k
5.4k (x0.63)
Test#3 (Generic, ZIP)
3.99k
2.37k (x0.59)
Test#1 (Memory)
3.51k
2.01k (x0.57)
TOTAL
19.47k
11.93k (x0.61)
Multithread
i7-4702MQ
i3-4030U
Test#1 (Integers)
11.93k
3.94k (x0.33)
Test#2 (FP)
42.4k
13.68k (x0.32)
Test#3 (Generic, ZIP)
18k
5.78k (x0.32)
Test#1 (Memory)
3.6k
2.44k (x0.68)
TOTAL
75.92k
25.84k (x0.34)
AVX2 optimized benchmark
The benchmark in mode III (AVX2), like AVX1, is optimized to used 256 bits registers beside the second version of the Advanced Vector Extensions (AVX). The first AVX2 compatible CPU was released in 2013.
Monothread
i7-4702MQ
i3-4030U
Test#1 (Integers)
18.98k
10.69k (x0.56)
Test#2 (FP)
9.5k
6.16k (x0.65)
Test#3 (Generic, ZIP)
4.32k
2.49k (x0.58)
Test#1 (Memory)
3.99k
2.23k (x0.56)
TOTAL
36.8k
21.57k (x0.59)
Multithread
i7-4702MQ
i3-4030U
Test#1 (Integers)
74.75k
21.84k (x0.29)
Test#2 (FP)
47.72k
15.86k (x0.33)
Test#3 (Generic, ZIP)
19.65k
5.94k (x0.3)
Test#1 (Memory)
3.02k
2.45k (x0.81)
TOTAL
145.15k
46.09k (x0.32)
Performance/W
i7-4702MQ
i3-4030U
Test#1 (Integers)
2020 points/W
1456 points/W
Test#2 (FP)
1290 points/W
1057 points/W
Test#3 (Generic, ZIP)
531 points/W
396 points/W
Test#1 (Memory)
82 points/W
163 points/W
TOTAL
3923 points/W
3073 points/W
Performance/GHz
i7-4702MQ
i3-4030U
Test#1 (Integers)
5932 points/GHz
5627 points/GHz
Test#2 (FP)
2968 points/GHz
3241 points/GHz
Test#3 (Generic, ZIP)
1351 points/GHz
1312 points/GHz
Test#1 (Memory)
1248 points/GHz
1173 points/GHz
TOTAL
11499 points/GHz
11353 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4