Core i7-3930K vs Xeon E5-2690 0
Description
Both models i7-3930K and E5-2690 0 are based on Sandy Bridge architecture.
"Sandy Bridge codename was originally ""Gesher"". The development began in 2005 and four years later, the first Sandy Bridge CPU was presented. The most prominent features are Intel Turbo Boost 2.0, AES encryption and SHA-1 hashing acceleration, Advanced Vector Extensions (AVX) 256-bit instruction set and the ability to have up to 8 physical cores or 16 logical cores through Hyper-Threading."
Using the multithread performance as a reference, the i7-3930K gets a score of 155.9 k points while the E5-2690 0 gets 185.3 k points.
Summarizing, the E5-2690 0 is 1.2 times faster than the i7-3930K . To get a proper comparison between both models, take a look to the data shown below.
"Sandy Bridge codename was originally ""Gesher"". The development began in 2005 and four years later, the first Sandy Bridge CPU was presented. The most prominent features are Intel Turbo Boost 2.0, AES encryption and SHA-1 hashing acceleration, Advanced Vector Extensions (AVX) 256-bit instruction set and the ability to have up to 8 physical cores or 16 logical cores through Hyper-Threading."
Using the multithread performance as a reference, the i7-3930K gets a score of 155.9 k points while the E5-2690 0 gets 185.3 k points.
Summarizing, the E5-2690 0 is 1.2 times faster than the i7-3930K . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
206d7
206d7
Core
Sandy Bridge-E
Sandy Bridge-EP
Base frecuency
3.2 GHz
2.9 GHz
Boost frecuency
3.8 GHz
3.8 GHz
Socket
LGA 2011
LGA 2011
Cores/Threads
6/12
8 /16
TDP
130 W
135 W
Cache L1 (d+i)
32+32 kB
8x32+8x32 kB
Cache L2
256 kB
8x256 kB
Cache L3
12288 kB
20480 kB
Date
November 2011
March 2012
Mean monothread perf.
27.76k points
23.28k points
Mean multithread perf.
155.86k points
185.26k points
AVX optimized benchmark
The benchmark in mode II (AVX) is optimized to used 256 bits registers beside the first version of the Advanced Vector Extensions (AVX). The first AVX compatible CPU was released in 2011.
Monothread
i7-3930K
E5-2690 0
Test#1 (Integers)
10.08k
8.76k (x0.87)
Test#2 (FP)
9.06k
7.35k (x0.81)
Test#3 (Generic, ZIP)
4.45k
3.86k (x0.87)
Test#1 (Memory)
4.16k
3.32k (x0.8)
TOTAL
27.76k
23.28k (x0.84)
Multithread
i7-3930K
E5-2690 0
Test#1 (Integers)
62.22k
78.51k (x1.26)
Test#2 (FP)
60.25k
66.46k (x1.1)
Test#3 (Generic, ZIP)
30.42k
36.42k (x1.2)
Test#1 (Memory)
2.97k
3.88k (x1.3)
TOTAL
155.86k
185.26k (x1.19)
Performance/W
i7-3930K
E5-2690 0
Test#1 (Integers)
479 points/W
582 points/W
Test#2 (FP)
463 points/W
492 points/W
Test#3 (Generic, ZIP)
234 points/W
270 points/W
Test#1 (Memory)
23 points/W
29 points/W
TOTAL
1199 points/W
1372 points/W
Performance/GHz
i7-3930K
E5-2690 0
Test#1 (Integers)
2653 points/GHz
2305 points/GHz
Test#2 (FP)
2383 points/GHz
1933 points/GHz
Test#3 (Generic, ZIP)
1172 points/GHz
1015 points/GHz
Test#1 (Memory)
1096 points/GHz
874 points/GHz
TOTAL
7304 points/GHz
6127 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4