Core i7-10510U vs Xeon E3-1220 v3
Description
The i7-10510U is based on Comet Lake architecture while the E3-1220 v3 is based on Haswell.
Using the multithread performance as a reference, the i7-10510U gets a score of 190.8 k points while the E3-1220 v3 gets 140.8 k points.
Summarizing, the i7-10510U is 1.4 times faster than the E3-1220 v3 . To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the i7-10510U gets a score of 190.8 k points while the E3-1220 v3 gets 140.8 k points.
Summarizing, the i7-10510U is 1.4 times faster than the E3-1220 v3 . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
806ec
306c3
Core
Comet Lake-U
Haswell-WS
Base frecuency
1.8 GHz
3.1 GHz
Boost frecuency
4.9 GHz
3.5 GHz
Socket
BGA 1528
LGA 1150
Cores/Threads
4/8
4 /4
TDP
15 W
80 W
Cache L1 (d+i)
4x32+4x32 kB
64 kB
Cache L2
4x256 kB
256 kB
Cache L3
8192 kB
8192 kB
Date
August 2019
June 2013
Mean monothread perf.
59.01k points
39.16k points
Mean multithread perf.
190.82k points
140.76k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
i7-10510U
E3-1220 v3
Test#1 (Integers)
4.91k
3.45k (x0.7)
Test#2 (FP)
20.01k
9.96k (x0.5)
Test#3 (Generic, ZIP)
6.05k
4.26k (x0.7)
Test#1 (Memory)
14.16k
4.27k (x0.3)
TOTAL
45.13k
21.94k (x0.49)
Multithread
i7-10510U
E3-1220 v3
Test#1 (Integers)
13.79k
14.01k (x1.02)
Test#2 (FP)
70.21k
37.68k (x0.54)
Test#3 (Generic, ZIP)
20.05k
17.05k (x0.85)
Test#1 (Memory)
8.04k
7.35k (x0.91)
TOTAL
112.09k
76.09k (x0.68)
AVX2 optimized benchmark
The benchmark in mode III (AVX2), like AVX1, is optimized to used 256 bits registers beside the second version of the Advanced Vector Extensions (AVX). The first AVX2 compatible CPU was released in 2013.
Monothread
i7-10510U
E3-1220 v3
Test#1 (Integers)
22.85k
19.17k (x0.84)
Test#2 (FP)
21.15k
10.55k (x0.5)
Test#3 (Generic, ZIP)
4.78k
4.79k (x1)
Test#1 (Memory)
10.24k
4.65k (x0.45)
TOTAL
59.01k
39.16k (x0.66)
Multithread
i7-10510U
E3-1220 v3
Test#1 (Integers)
86.08k
73.13k (x0.85)
Test#2 (FP)
79.78k
42.06k (x0.53)
Test#3 (Generic, ZIP)
18.26k
18.03k (x0.99)
Test#1 (Memory)
6.69k
7.54k (x1.13)
TOTAL
190.82k
140.76k (x0.74)
Performance/W
i7-10510U
E3-1220 v3
Test#1 (Integers)
5739 points/W
914 points/W
Test#2 (FP)
5319 points/W
526 points/W
Test#3 (Generic, ZIP)
1217 points/W
225 points/W
Test#1 (Memory)
446 points/W
94 points/W
TOTAL
12721 points/W
1759 points/W
Performance/GHz
i7-10510U
E3-1220 v3
Test#1 (Integers)
4664 points/GHz
5478 points/GHz
Test#2 (FP)
4316 points/GHz
3014 points/GHz
Test#3 (Generic, ZIP)
975 points/GHz
1368 points/GHz
Test#1 (Memory)
2089 points/GHz
1328 points/GHz
TOTAL
12044 points/GHz
11188 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4