Core i5-4300U vs Xeon E5-2670 v3
Description
Both models i5-4300U and E5-2670 v3 are based on Haswell architecture.
"Haswell is known as fourth-generation core too. It uses 22nm Tri-Gate FinFET (non-planar, ""3D"") technology. It includes four arithmetic logic unit (ALU) and three address generation unit (AGU). This generation is able to run Advanced Vector Extensions 2 (AVX2) instruction set among BMI1, BMI2, ABM and FMA3. At this time, Intel used new sockets: LGA 1150 for desktops and BGA1364 for the mobile CPUs."
Using the multithread performance as a reference, the i5-4300U gets a score of 64.8 k points while the E5-2670 v3 gets 452.9 k points.
Summarizing, the E5-2670 v3 is 7 times faster than the i5-4300U. To get a proper comparison between both models, take a look to the data shown below.
"Haswell is known as fourth-generation core too. It uses 22nm Tri-Gate FinFET (non-planar, ""3D"") technology. It includes four arithmetic logic unit (ALU) and three address generation unit (AGU). This generation is able to run Advanced Vector Extensions 2 (AVX2) instruction set among BMI1, BMI2, ABM and FMA3. At this time, Intel used new sockets: LGA 1150 for desktops and BGA1364 for the mobile CPUs."
Using the multithread performance as a reference, the i5-4300U gets a score of 64.8 k points while the E5-2670 v3 gets 452.9 k points.
Summarizing, the E5-2670 v3 is 7 times faster than the i5-4300U. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
40651
306f2
Core
Haswell
Haswell-EP
Base frecuency
1.9 GHz
2.3 GHz
Boost frecuency
2.9 GHz
3.1 GHz
Socket
BGA 1168
LGA 2011-3
Cores/Threads
2/4
12/24
TDP
15 W
120 W
Cache L1 (d+i)
2x32+2x32 kB
12x32+12x32 kB
Cache L2
2x256 kB
12x256 kB
Cache L3
3072 kB
30720 kB
Date
January 2013
September 2014
Mean monothread perf.
32.18k points
36.41k points
Mean multithread perf.
64.79k points
452.9k points
AVX2 optimized benchmark
The benchmark in mode III (AVX2), like AVX1, is optimized to used 256 bits registers beside the second version of the Advanced Vector Extensions (AVX). The first AVX2 compatible CPU was released in 2013.
Monothread
i5-4300U
E5-2670 v3
Test#1 (Integers)
16.54k
18.62k (x1.13)
Test#2 (FP)
8.71k
10.49k (x1.21)
Test#3 (Generic, ZIP)
3.69k
4.04k (x1.09)
Test#1 (Memory)
3.24k
3.26k (x1.01)
TOTAL
32.18k
36.41k (x1.13)
Multithread
i5-4300U
E5-2670 v3
Test#1 (Integers)
31.64k
236.25k (x7.47)
Test#2 (FP)
21.59k
151.05k (x7)
Test#3 (Generic, ZIP)
8.46k
58.9k (x6.96)
Test#1 (Memory)
3.09k
6.7k (x2.17)
TOTAL
64.79k
452.9k (x6.99)
Performance/W
i5-4300U
E5-2670 v3
Test#1 (Integers)
2110 points/W
1969 points/W
Test#2 (FP)
1439 points/W
1259 points/W
Test#3 (Generic, ZIP)
564 points/W
491 points/W
Test#1 (Memory)
206 points/W
56 points/W
TOTAL
4319 points/W
3774 points/W
Performance/GHz
i5-4300U
E5-2670 v3
Test#1 (Integers)
5705 points/GHz
6006 points/GHz
Test#2 (FP)
3003 points/GHz
3385 points/GHz
Test#3 (Generic, ZIP)
1274 points/GHz
1303 points/GHz
Test#1 (Memory)
1116 points/GHz
1052 points/GHz
TOTAL
11097 points/GHz
11745 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4