Core i5-4210U vs i7-4720HQ
Description
Both models i5-4210U and i7-4720HQ are based on Haswell architecture.
"Haswell is known as fourth-generation core too. It uses 22nm Tri-Gate FinFET (non-planar, ""3D"") technology. It includes four arithmetic logic unit (ALU) and three address generation unit (AGU). This generation is able to run Advanced Vector Extensions 2 (AVX2) instruction set among BMI1, BMI2, ABM and FMA3. At this time, Intel used new sockets: LGA 1150 for desktops and BGA1364 for the mobile CPUs."
Using the multithread performance as a reference, the i5-4210U gets a score of 57.6 k points while the i7-4720HQ gets 132.3 k points.
Summarizing, the i7-4720HQ is 2.3 times faster than the i5-4210U. To get a proper comparison between both models, take a look to the data shown below.
"Haswell is known as fourth-generation core too. It uses 22nm Tri-Gate FinFET (non-planar, ""3D"") technology. It includes four arithmetic logic unit (ALU) and three address generation unit (AGU). This generation is able to run Advanced Vector Extensions 2 (AVX2) instruction set among BMI1, BMI2, ABM and FMA3. At this time, Intel used new sockets: LGA 1150 for desktops and BGA1364 for the mobile CPUs."
Using the multithread performance as a reference, the i5-4210U gets a score of 57.6 k points while the i7-4720HQ gets 132.3 k points.
Summarizing, the i7-4720HQ is 2.3 times faster than the i5-4210U. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
40651
306c3
Core
Haswell
Haswell
Base frecuency
1.7 GHz
2.6 GHz
Boost frecuency
2.7 GHz
3.6 GHz
Socket
BGA 1169
BGA1364
Cores/Threads
2/4
4/8
TDP
15 W
47 W
Cache L1 (d+i)
2x32+2x32 kB
4x32+4x32 kB
Cache L2
2x256 kB
4x256 kB
Cache L3
3072 kB
6144 kB
Date
April 2014
January 2015
Mean monothread perf.
27.41k points
40.12k points
Mean multithread perf.
57.58k points
132.35k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
i5-4210U
i7-4720HQ
Test#1 (Integers)
2.95k
3.79k (x1.29)
Test#2 (FP)
7.38k
9.64k (x1.31)
Test#3 (Generic, ZIP)
3.11k
4.34k (x1.39)
Test#1 (Memory)
2.91k
3.76k (x1.29)
TOTAL
16.35k
21.53k (x1.32)
Multithread
i5-4210U
i7-4720HQ
Test#1 (Integers)
4.86k
11.66k (x2.4)
Test#2 (FP)
17.41k
37.71k (x2.17)
Test#3 (Generic, ZIP)
7.09k
16.38k (x2.31)
Test#1 (Memory)
2.5k
5.94k (x2.38)
TOTAL
31.86k
71.69k (x2.25)
AVX2 optimized benchmark
The benchmark in mode III (AVX2), like AVX1, is optimized to used 256 bits registers beside the second version of the Advanced Vector Extensions (AVX). The first AVX2 compatible CPU was released in 2013.
Monothread
i5-4210U
i7-4720HQ
Test#1 (Integers)
13.79k
20.68k (x1.5)
Test#2 (FP)
7.79k
10.28k (x1.32)
Test#3 (Generic, ZIP)
3.11k
4.87k (x1.57)
Test#1 (Memory)
2.72k
4.29k (x1.57)
TOTAL
27.41k
40.12k (x1.46)
Multithread
i5-4210U
i7-4720HQ
Test#1 (Integers)
28.78k
66.84k (x2.32)
Test#2 (FP)
18.99k
42.85k (x2.26)
Test#3 (Generic, ZIP)
7.21k
16.77k (x2.33)
Test#1 (Memory)
2.6k
5.88k (x2.26)
TOTAL
57.58k
132.35k (x2.3)
Performance/W
i5-4210U
i7-4720HQ
Test#1 (Integers)
1919 points/W
1422 points/W
Test#2 (FP)
1266 points/W
912 points/W
Test#3 (Generic, ZIP)
481 points/W
357 points/W
Test#1 (Memory)
174 points/W
125 points/W
TOTAL
3839 points/W
2816 points/W
Performance/GHz
i5-4210U
i7-4720HQ
Test#1 (Integers)
5108 points/GHz
5745 points/GHz
Test#2 (FP)
2884 points/GHz
2856 points/GHz
Test#3 (Generic, ZIP)
1150 points/GHz
1352 points/GHz
Test#1 (Memory)
1008 points/GHz
1191 points/GHz
TOTAL
10151 points/GHz
11143 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4