Core i5-2410M vs Pentium G850
Description
Both models i5-2410M and G850 are based on Sandy Bridge architecture.
"Sandy Bridge codename was originally ""Gesher"". The development began in 2005 and four years later, the first Sandy Bridge CPU was presented. The most prominent features are Intel Turbo Boost 2.0, AES encryption and SHA-1 hashing acceleration, Advanced Vector Extensions (AVX) 256-bit instruction set and the ability to have up to 8 physical cores or 16 logical cores through Hyper-Threading."
Using the multithread performance as a reference, the i5-2410M gets a score of 36.9 k points while the G850 gets 40.5 k points.
Summarizing, the G850 is 1.1 times faster than the i5-2410M . To get a proper comparison between both models, take a look to the data shown below.
"Sandy Bridge codename was originally ""Gesher"". The development began in 2005 and four years later, the first Sandy Bridge CPU was presented. The most prominent features are Intel Turbo Boost 2.0, AES encryption and SHA-1 hashing acceleration, Advanced Vector Extensions (AVX) 256-bit instruction set and the ability to have up to 8 physical cores or 16 logical cores through Hyper-Threading."
Using the multithread performance as a reference, the i5-2410M gets a score of 36.9 k points while the G850 gets 40.5 k points.
Summarizing, the G850 is 1.1 times faster than the i5-2410M . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
206a7
206a7
Core
Sandy Bridge
Sandy Bridge
Base frecuency
2.3 GHz
2.9 GHz
Boost frecuency
2.9 GHz
2.9 GHz
Socket
Socket G2 (988B)
LGA 1155
Cores/Threads
2/2
2/2
TDP
35 W
65 W
Cache L1 (d+i)
2x32+2x32 kB
32+32 kB
Cache L2
2x256 kB
256 kB
Cache L3
3072 kB
3072 kB
Date
February 2011
May 2012
Mean monothread perf.
20.1k points
21.85k points
Mean multithread perf.
38.68k points
40.5k points
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
i5-2410M
G850
Test#1 (Integers)
7.98k
8.77k (x1.1)
Test#2 (FP)
6.55k
7.08k (x1.08)
Test#3 (Generic, ZIP)
3.28k
3.72k (x1.13)
Test#1 (Memory)
2.7k
2.28k (x0.84)
TOTAL
20.52k
21.85k (x1.06)
Multithread
i5-2410M
G850
Test#1 (Integers)
13.66k
17.5k (x1.28)
Test#2 (FP)
13.17k
13.48k (x1.02)
Test#3 (Generic, ZIP)
7.05k
7.32k (x1.04)
Test#1 (Memory)
3.02k
2.19k (x0.73)
TOTAL
36.9k
40.5k (x1.1)
Performance/W
i5-2410M
G850
Test#1 (Integers)
390 points/W
269 points/W
Test#2 (FP)
376 points/W
207 points/W
Test#3 (Generic, ZIP)
202 points/W
113 points/W
Test#1 (Memory)
86 points/W
34 points/W
TOTAL
1054 points/W
623 points/W
Performance/GHz
i5-2410M
G850
Test#1 (Integers)
2752 points/GHz
3025 points/GHz
Test#2 (FP)
2258 points/GHz
2440 points/GHz
Test#3 (Generic, ZIP)
1132 points/GHz
1283 points/GHz
Test#1 (Memory)
933 points/GHz
787 points/GHz
TOTAL
7075 points/GHz
7534 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4