Core i5-10500H vs E5-2620 v3
Description
The i5-10500H is based on Comet Lake architecture while the E5-2620 v3 is based on Haswell.
Using the multithread performance as a reference, the i5-10500H gets a score of 379 k points while the E5-2620 v3 gets 358 k points.
Summarizing, the i5-10500H is 1.1 times faster than the E5-2620 v3. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the i5-10500H gets a score of 379 k points while the E5-2620 v3 gets 358 k points.
Summarizing, the i5-10500H is 1.1 times faster than the E5-2620 v3. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
a0652
306f2
Core
Comet Lake-S
Haswell-EP
Base frecuency
3.1 GHz
2.4 GHz
Boost frecuency
4.5 GHz
3.2 GHz
Socket
LGA 1200
LGA 2011-3
Cores/Threads
6/12
6/12
TDP
65 W
85 W
Cache L1 (d+i)
6x32+6x32 kB
6x32+6x32 kB
Cache L2
6x256 kB
6x256 kB
Cache L3
12288 kB
15360 kB
Date
April 2020
September 2014
Mean monothread perf.
72.1k points
35.86k points
Mean multithread perf.
378.99k points
357.99k points
AVX2 optimized benchmark
The benchmark in mode III (AVX2), like AVX1, is optimized to used 256 bits registers beside the second version of the Advanced Vector Extensions (AVX). The first AVX2 compatible CPU was released in 2013.
Monothread
i5-10500H
E5-2620 v3
Test#1 (Integers)
27.93k
18.64k (x0.67)
Test#2 (FP)
25.41k
10.55k (x0.42)
Test#3 (Generic, ZIP)
5.91k
4.12k (x0.7)
Test#1 (Memory)
12.85k
2.54k (x0.2)
TOTAL
72.1k
35.86k (x0.5)
Multithread
i5-10500H
E5-2620 v3
Test#1 (Integers)
176.41k
181.66k (x1.03)
Test#2 (FP)
158.8k
122.09k (x0.77)
Test#3 (Generic, ZIP)
38.53k
47.02k (x1.22)
Test#1 (Memory)
5.25k
7.22k (x1.37)
TOTAL
378.99k
357.99k (x0.94)
Performance/W
i5-10500H
E5-2620 v3
Test#1 (Integers)
2714 points/W
2137 points/W
Test#2 (FP)
2443 points/W
1436 points/W
Test#3 (Generic, ZIP)
593 points/W
553 points/W
Test#1 (Memory)
81 points/W
85 points/W
TOTAL
5831 points/W
4212 points/W
Performance/GHz
i5-10500H
E5-2620 v3
Test#1 (Integers)
6207 points/GHz
5826 points/GHz
Test#2 (FP)
5647 points/GHz
3297 points/GHz
Test#3 (Generic, ZIP)
1313 points/GHz
1288 points/GHz
Test#1 (Memory)
2856 points/GHz
794 points/GHz
TOTAL
16023 points/GHz
11205 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4