Celeron N3150 vs Core i3-6100U
Description
The N3150 is based on Airmont architecture while the i3-6100U is based on Skylake.
Using the multithread performance as a reference, the N3150 gets a score of 31.8 k points while the i3-6100U gets 50.2 k points.
Summarizing, the i3-6100U is 1.6 times faster than the N3150. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the N3150 gets a score of 31.8 k points while the i3-6100U gets 50.2 k points.
Summarizing, the i3-6100U is 1.6 times faster than the N3150. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
406c3
406e3
Core
Braswell
Skylake-U
Base frecuency
1.6 GHz
2.3 GHz
Boost frecuency
2.08 GHz
2.3 GHz
Socket
BGA1170
BGA1356
Cores/Threads
4/4
2/4
TDP
6 W
15 W
Cache L1 (d+i)
4x32+4x24 kB
2x32+2x32 kB
Cache L2
2x1024 kB
2x256 kB
Cache L3
kB
3072 kB
Date
March 2015
September 2015
Mean monothread perf.
9.21k points
30.73k points
Mean multithread perf.
31.8k points
69.94k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
N3150
i3-6100U
Test#1 (Integers)
1.07k
2.27k (x2.12)
Test#2 (FP)
1.74k
9.18k (x5.28)
Test#3 (Generic, ZIP)
1.5k
2.97k (x1.98)
Test#1 (Memory)
1.46k
3.79k (x2.59)
TOTAL
5.78k
18.21k (x3.15)
Multithread
N3150
i3-6100U
Test#1 (Integers)
3.99k
4.79k (x1.2)
Test#2 (FP)
6.31k
23.04k (x3.65)
Test#3 (Generic, ZIP)
5.05k
7.55k (x1.49)
Test#1 (Memory)
2.65k
3.86k (x1.45)
TOTAL
18k
39.24k (x2.18)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
N3150
i3-6100U
Test#1 (Integers)
3.91k
7.99k (x2.04)
Test#2 (FP)
2.29k
11.82k (x5.16)
Test#3 (Generic, ZIP)
1.57k
2.97k (x1.89)
Test#1 (Memory)
1.44k
3.75k (x2.6)
TOTAL
9.21k
26.52k (x2.88)
Multithread
N3150
i3-6100U
Test#1 (Integers)
14.78k
15.44k (x1.04)
Test#2 (FP)
8.62k
23.79k (x2.76)
Test#3 (Generic, ZIP)
5.84k
6.93k (x1.19)
Test#1 (Memory)
2.57k
4.03k (x1.57)
TOTAL
31.8k
50.19k (x1.58)
Performance/W
N3150
i3-6100U
Test#1 (Integers)
2463 points/W
1029 points/W
Test#2 (FP)
1437 points/W
1586 points/W
Test#3 (Generic, ZIP)
973 points/W
462 points/W
Test#1 (Memory)
428 points/W
269 points/W
TOTAL
5300 points/W
3346 points/W
Performance/GHz
N3150
i3-6100U
Test#1 (Integers)
1880 points/GHz
3474 points/GHz
Test#2 (FP)
1102 points/GHz
5137 points/GHz
Test#3 (Generic, ZIP)
755 points/GHz
1290 points/GHz
Test#1 (Memory)
692 points/GHz
1631 points/GHz
TOTAL
4429 points/GHz
11532 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4