Celeron G3900TE vs Xeon E5-2670 v3
Description
The G3900TE is based on Skylake architecture while the E5-2670 v3 is based on Haswell.
Using the multithread performance as a reference, the G3900TE gets a score of 49.3 k points while the E5-2670 v3 gets 325.8 k points.
Summarizing, the E5-2670 v3 is 6.6 times faster than the G3900TE. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the G3900TE gets a score of 49.3 k points while the E5-2670 v3 gets 325.8 k points.
Summarizing, the E5-2670 v3 is 6.6 times faster than the G3900TE. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
506e3
306f2
Core
Skylake-S
Haswell-EP
Base frecuency
2.3 GHz
2.3 GHz
Boost frecuency
2.3 GHz
3.1 GHz
Socket
LGA 1151
LGA 2011-3
Cores/Threads
2/2
12/24
TDP
35 W
120 W
Cache L1 (d+i)
2x32+2x32 kB
12x32+12x32 kB
Cache L2
2x256 kB
12x256 kB
Cache L3
2048 kB
30720 kB
Date
December 2015
September 2014
Mean monothread perf.
27.33k points
36.41k points
Mean multithread perf.
49.34k points
452.9k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
G3900TE
E5-2670 v3
Test#1 (Integers)
2.36k
3.52k (x1.49)
Test#2 (FP)
9.79k
8.68k (x0.89)
Test#3 (Generic, ZIP)
3.08k
2.83k (x0.92)
Test#1 (Memory)
3.36k
3.13k (x0.93)
TOTAL
18.59k
18.17k (x0.98)
Multithread
G3900TE
E5-2670 v3
Test#1 (Integers)
4.45k
32.7k (x7.35)
Test#2 (FP)
18.16k
105.18k (x5.79)
Test#3 (Generic, ZIP)
5.48k
35.18k (x6.43)
Test#1 (Memory)
3.5k
9.54k (x2.72)
TOTAL
31.59k
182.59k (x5.78)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
G3900TE
E5-2670 v3
Test#1 (Integers)
8.56k
11.08k (x1.29)
Test#2 (FP)
12.25k
9.57k (x0.78)
Test#3 (Generic, ZIP)
3.17k
3.18k (x1)
Test#1 (Memory)
3.35k
3.28k (x0.98)
TOTAL
27.33k
27.11k (x0.99)
Multithread
G3900TE
E5-2670 v3
Test#1 (Integers)
16.42k
139.07k (x8.47)
Test#2 (FP)
23.61k
133.47k (x5.65)
Test#3 (Generic, ZIP)
5.75k
46.6k (x8.1)
Test#1 (Memory)
3.55k
6.65k (x1.88)
TOTAL
49.34k
325.78k (x6.6)
Performance/W
G3900TE
E5-2670 v3
Test#1 (Integers)
469 points/W
1159 points/W
Test#2 (FP)
675 points/W
1112 points/W
Test#3 (Generic, ZIP)
164 points/W
388 points/W
Test#1 (Memory)
101 points/W
55 points/W
TOTAL
1410 points/W
2715 points/W
Performance/GHz
G3900TE
E5-2670 v3
Test#1 (Integers)
3724 points/GHz
3573 points/GHz
Test#2 (FP)
5326 points/GHz
3087 points/GHz
Test#3 (Generic, ZIP)
1380 points/GHz
1027 points/GHz
Test#1 (Memory)
1455 points/GHz
1059 points/GHz
TOTAL
11885 points/GHz
8745 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4