Celeron G1610T vs Core i7-930
Description
The G1610T is based on Ivy Bridge architecture while the i7-930 is based on Westmere.
Using the multithread performance as a reference, the G1610T gets a score of 38.6 k points while the i7-930 gets 69.4 k points.
Summarizing, the i7-930 is 1.8 times faster than the G1610T . To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the G1610T gets a score of 38.6 k points while the i7-930 gets 69.4 k points.
Summarizing, the i7-930 is 1.8 times faster than the G1610T . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
306a9
106a5
Core
Ivy Bridge
Bloomfield
Base frecuency
2.3 GHz
2.8 GHz
Boost frecuency
2.3 GHz
3.067 GHz
Socket
LGA 1155
LGA 1366
Cores/Threads
2/2
4/8
TDP
35 W
130 W
Cache L1 (d+i)
32+32 kB
32+32 kB
Cache L2
256 kB
256 kB
Cache L3
2048 kB
8192 kB
Date
December 2012
February 2010
Mean monothread perf.
20.84k points
17.58k points
Mean multithread perf.
38.59k points
69.39k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
G1610T
i7-930
Test#1 (Integers)
2.34k
1.94k (x0.83)
Test#2 (FP)
6.54k
4.38k (x0.67)
Test#3 (Generic, ZIP)
3k
2.64k (x0.88)
Test#1 (Memory)
2.74k
2.41k (x0.88)
TOTAL
14.62k
11.37k (x0.78)
Multithread
G1610T
i7-930
Test#1 (Integers)
4.67k
7.3k (x1.57)
Test#2 (FP)
12.66k
19.36k (x1.53)
Test#3 (Generic, ZIP)
5.95k
13.43k (x2.26)
Test#1 (Memory)
2.53k
2.01k (x0.8)
TOTAL
25.8k
42.11k (x1.63)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
G1610T
i7-930
Test#1 (Integers)
7.87k
7.28k (x0.92)
Test#2 (FP)
7.14k
4.82k (x0.68)
Test#3 (Generic, ZIP)
3.04k
2.86k (x0.94)
Test#1 (Memory)
2.79k
2.62k (x0.94)
TOTAL
20.84k
17.58k (x0.84)
Multithread
G1610T
i7-930
Test#1 (Integers)
15.12k
28.09k (x1.86)
Test#2 (FP)
14.05k
21.62k (x1.54)
Test#3 (Generic, ZIP)
5.94k
14.83k (x2.5)
Test#1 (Memory)
3.48k
4.85k (x1.39)
TOTAL
38.59k
69.39k (x1.8)
Performance/W
G1610T
i7-930
Test#1 (Integers)
432 points/W
216 points/W
Test#2 (FP)
401 points/W
166 points/W
Test#3 (Generic, ZIP)
170 points/W
114 points/W
Test#1 (Memory)
99 points/W
37 points/W
TOTAL
1103 points/W
534 points/W
Performance/GHz
G1610T
i7-930
Test#1 (Integers)
3423 points/GHz
2372 points/GHz
Test#2 (FP)
3102 points/GHz
1571 points/GHz
Test#3 (Generic, ZIP)
1323 points/GHz
933 points/GHz
Test#1 (Memory)
1211 points/GHz
855 points/GHz
TOTAL
9060 points/GHz
5732 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4