Celeron E3300 vs Core 2 Duo T5500
Description
Both models E3300 and T5500 are based on Core architecture.
Using the multithread performance as a reference, the E3300 gets a score of 24.6 k points while the T5500 gets 11.8 k points.
Summarizing, the E3300 is 2.1 times faster than the T5500 . To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the E3300 gets a score of 24.6 k points while the T5500 gets 11.8 k points.
Summarizing, the E3300 is 2.1 times faster than the T5500 . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
1067a
6f2
Core
Wolfdale
Merom
Base frecuency
2.5 GHz
1.667 GHz
Boost frecuency
2.5 GHz
1.66 GHz
Socket
LGA 775
Socket M
Cores/Threads
2/2
2/2
TDP
65 W
35 W
Cache L1 (d+i)
32+32 kB
32+32 kB
Cache L2
1024 kB
2048 kB
Date
August 2009
July 2006
Mean monothread perf.
12.94k points
6.41k points
Mean multithread perf.
24.6k points
11.81k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
E3300
T5500
Test#1 (Integers)
2.29k
1.58k (x0.69)
Test#2 (FP)
5.87k
1.67k (x0.28)
Test#3 (Generic, ZIP)
2.49k
1.67k (x0.67)
Test#1 (Memory)
1.01k
0.96k (x0.95)
TOTAL
11.66k
5.89k (x0.51)
Multithread
E3300
T5500
Test#1 (Integers)
4.57k
3.18k (x0.7)
Test#2 (FP)
11.66k
3.28k (x0.28)
Test#3 (Generic, ZIP)
4.89k
3.23k (x0.66)
Test#1 (Memory)
1.04k
1.04k (x1.01)
TOTAL
22.16k
10.74k (x0.48)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
E3300
T5500
Test#1 (Integers)
2.9k
1.93k (x0.67)
Test#2 (FP)
6.38k
1.73k (x0.27)
Test#3 (Generic, ZIP)
2.59k
1.74k (x0.67)
Test#1 (Memory)
1.08k
1.01k (x0.94)
TOTAL
12.94k
6.41k (x0.5)
Multithread
E3300
T5500
Test#1 (Integers)
5.76k
3.84k (x0.67)
Test#2 (FP)
12.67k
3.43k (x0.27)
Test#3 (Generic, ZIP)
5.16k
3.45k (x0.67)
Test#1 (Memory)
1.01k
1.08k (x1.06)
TOTAL
24.6k
11.81k (x0.48)
Performance/W
E3300
T5500
Test#1 (Integers)
89 points/W
110 points/W
Test#2 (FP)
195 points/W
98 points/W
Test#3 (Generic, ZIP)
79 points/W
99 points/W
Test#1 (Memory)
16 points/W
31 points/W
TOTAL
378 points/W
337 points/W
Performance/GHz
E3300
T5500
Test#1 (Integers)
1159 points/GHz
1163 points/GHz
Test#2 (FP)
2551 points/GHz
1043 points/GHz
Test#3 (Generic, ZIP)
1034 points/GHz
1049 points/GHz
Test#1 (Memory)
431 points/GHz
608 points/GHz
TOTAL
5175 points/GHz
3863 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4