E Series E-350 vs Atom N450
Description
The E-350 is based on Bobcat architecture while the N450 is based on Bonnell.
Using the multithread performance as a reference, the E-350 gets a score of 10 k points while the N450 gets 4.6 k points.
Summarizing, the E-350 is 2.2 times faster than the N450 . To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the E-350 gets a score of 10 k points while the N450 gets 4.6 k points.
Summarizing, the E-350 is 2.2 times faster than the N450 . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
500f10
106ca
Core
Zacate
Pineview
Base frecuency
1.6 GHz
1.667 GHz
Socket
Socket FT1
BGA 559
Cores/Threads
2/2
1 /2
TDP
18 W
6 W
Cache L1 (d+i)
kB
64 kB
Cache L2
2x512 kB
512 kB
Date
January 2011
December 2009
Mean monothread perf.
6.26k points
3.42k points
Mean multithread perf.
10.05k points
4.58k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
E-350
N450
Test#1 (Integers)
0.83k
0.37k (x0.44)
Test#2 (FP)
2.38k
0.77k (x0.32)
Test#3 (Generic, ZIP)
1.41k
0.79k (x0.56)
Test#1 (Memory)
0.75k
0.63k (x0.84)
TOTAL
5.37k
2.55k (x0.48)
Multithread
E-350
N450
Test#1 (Integers)
1.45k
0.56k (x0.39)
Test#2 (FP)
3.97k
1.25k (x0.32)
Test#3 (Generic, ZIP)
2.18k
1.09k (x0.5)
Test#1 (Memory)
0.82k
0.64k (x0.79)
TOTAL
8.42k
3.55k (x0.42)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
E-350
N450
Test#1 (Integers)
1.78k
1.08k (x0.6)
Test#2 (FP)
2.33k
0.84k (x0.36)
Test#3 (Generic, ZIP)
1.41k
0.94k (x0.67)
Test#1 (Memory)
0.74k
0.56k (x0.75)
TOTAL
6.26k
3.42k (x0.55)
Multithread
E-350
N450
Test#1 (Integers)
2.84k
1.32k (x0.47)
Test#2 (FP)
3.89k
1.33k (x0.34)
Test#3 (Generic, ZIP)
2.42k
1.29k (x0.53)
Test#1 (Memory)
0.9k
0.63k (x0.7)
TOTAL
10.05k
4.58k (x0.46)
Performance/W
E-350
N450
Test#1 (Integers)
158 points/W
220 points/W
Test#2 (FP)
216 points/W
222 points/W
Test#3 (Generic, ZIP)
134 points/W
216 points/W
Test#1 (Memory)
50 points/W
105 points/W
TOTAL
558 points/W
763 points/W
Performance/GHz
E-350
N450
Test#1 (Integers)
1115 points/GHz
647 points/GHz
Test#2 (FP)
1454 points/GHz
504 points/GHz
Test#3 (Generic, ZIP)
879 points/GHz
563 points/GHz
Test#1 (Memory)
465 points/GHz
337 points/GHz
TOTAL
3914 points/GHz
2051 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4