Core i7-1165G7 vs Xeon E5-2697 v2
Description
The i7-1165G7 is based on Tiger Lake architecture while the E5-2697 v2 is based on Ivy Bridge.
Using the multithread performance as a reference, the i7-1165G7 gets a score of 190.1 k points while the E5-2697 v2 gets 633.1 k points.
Summarizing, the E5-2697 v2 is 3.3 times faster than the i7-1165G7. To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the i7-1165G7 gets a score of 190.1 k points while the E5-2697 v2 gets 633.1 k points.
Summarizing, the E5-2697 v2 is 3.3 times faster than the i7-1165G7. To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
806c1
306e4
Core
Tiger Lake-UP3
Ivy Bridge-EP
Base frecuency
2.8 GHz
2.7 GHz
Boost frecuency
4.7 GHz
3.5 GHz
Socket
BGA 1449
LGA 2011
Cores/Threads
4/8
12 /24
TDP
28 W
130 W
Cache L1 (d+i)
4x32+4x48 kB
12x32+12x32 kB
Cache L2
4x1280 kB
12x256 kB
Cache L3
12288 kB
30720 kB
Date
September 2020
September 2013
Mean monothread perf.
62.1k points
27.92k points
Mean multithread perf.
210.4k points
633.14k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
i7-1165G7
E5-2697 v2
Test#1 (Integers)
4.26k
3.44k (x0.81)
Test#2 (FP)
19.54k
9.54k (x0.49)
Test#3 (Generic, ZIP)
10.95k
4.21k (x0.38)
Test#1 (Memory)
11.08k
3.94k (x0.36)
TOTAL
45.84k
21.13k (x0.46)
Multithread
i7-1165G7
E5-2697 v2
Test#1 (Integers)
15.69k
73.17k (x4.66)
Test#2 (FP)
68.3k
230.83k (x3.38)
Test#3 (Generic, ZIP)
33.66k
107.14k (x3.18)
Test#1 (Memory)
12.16k
7.99k (x0.66)
TOTAL
129.81k
419.12k (x3.23)
SSE3 optimized benchmark
The benchmark in mode I (SSE) is optimized for the use of SIMD instructions with 128 bits register and the SSE set up to version 3. Nearly every modern CPU has support for this mode.
Monothread
i7-1165G7
E5-2697 v2
Test#1 (Integers)
14.48k
10.64k (x0.73)
Test#2 (FP)
24.18k
9.53k (x0.39)
Test#3 (Generic, ZIP)
11.95k
4.12k (x0.34)
Test#1 (Memory)
11.01k
3.62k (x0.33)
TOTAL
61.62k
27.91k (x0.45)
Multithread
i7-1165G7
E5-2697 v2
Test#1 (Integers)
50.98k
252.69k (x4.96)
Test#2 (FP)
80.7k
238.68k (x2.96)
Test#3 (Generic, ZIP)
36.61k
115.5k (x3.15)
Test#1 (Memory)
12.02k
10.98k (x0.91)
TOTAL
180.32k
617.84k (x3.43)
AVX optimized benchmark
The benchmark in mode II (AVX) is optimized to used 256 bits registers beside the first version of the Advanced Vector Extensions (AVX). The first AVX compatible CPU was released in 2011.
Monothread
i7-1165G7
E5-2697 v2
Test#1 (Integers)
16.27k
10.53k (x0.65)
Test#2 (FP)
25.74k
9.98k (x0.39)
Test#3 (Generic, ZIP)
11.5k
4k (x0.35)
Test#1 (Memory)
10.82k
3.4k (x0.31)
TOTAL
64.32k
27.92k (x0.43)
Multithread
i7-1165G7
E5-2697 v2
Test#1 (Integers)
54k
247.05k (x4.58)
Test#2 (FP)
88.76k
264.43k (x2.98)
Test#3 (Generic, ZIP)
35.23k
111.01k (x3.15)
Test#1 (Memory)
12.14k
10.66k (x0.88)
TOTAL
190.12k
633.14k (x3.33)
Performance/W
i7-1165G7
E5-2697 v2
Test#1 (Integers)
1928 points/W
1900 points/W
Test#2 (FP)
3170 points/W
2034 points/W
Test#3 (Generic, ZIP)
1258 points/W
854 points/W
Test#1 (Memory)
434 points/W
82 points/W
TOTAL
6790 points/W
4870 points/W
Performance/GHz
i7-1165G7
E5-2697 v2
Test#1 (Integers)
3462 points/GHz
3007 points/GHz
Test#2 (FP)
5476 points/GHz
2852 points/GHz
Test#3 (Generic, ZIP)
2447 points/GHz
1144 points/GHz
Test#1 (Memory)
2302 points/GHz
973 points/GHz
TOTAL
13686 points/GHz
7976 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4