Core i5-1135G7 vs i7-5820K
Description
The i5-1135G7 is based on Tiger Lake architecture while the i7-5820K is based on Haswell.
Using the multithread performance as a reference, the i5-1135G7 gets a score of 157.1 k points while the i7-5820K gets 129.1 k points.
Summarizing, the i5-1135G7 is 1.2 times faster than the i7-5820K . To get a proper comparison between both models, take a look to the data shown below.
Using the multithread performance as a reference, the i5-1135G7 gets a score of 157.1 k points while the i7-5820K gets 129.1 k points.
Summarizing, the i5-1135G7 is 1.2 times faster than the i7-5820K . To get a proper comparison between both models, take a look to the data shown below.
Specs
CPUID
806c1
306f2
Core
Tiger Lake UP3
Haswell-E
Base frecuency
2.4 GHz
3.3 GHz
Boost frecuency
4.2 GHz
3.6 GHz
Socket
BGA 1449
LGA 1150
Cores/Threads
4/8
6/12
TDP
28 W
140 W
Cache L1 (d+i)
4x32+4x48 kB
6x32+6x32 kB
Cache L2
4x1280 kB
6x256 kB
Cache L3
8192 kB
15360 kB
Date
September 2020
September 2014
Mean monothread perf.
68.08k points
31.53k points
Mean multithread perf.
237.55k points
129.06k points
Non-optimized benchmark
The benchmark in Mode 0 (FPU) measures cpu performance with non-optimized software. It uses the basic µinstructions from the i386 architecture with the i387 floating point unit. This mode is compatible with all CPUs so it's practical to compare very different CPUs
Monothread
i5-1135G7
i7-5820K
Test#1 (Integers)
3.75k
3.82k (x1.02)
Test#2 (FP)
17.28k
9.64k (x0.56)
Test#3 (Generic, ZIP)
9.5k
4.29k (x0.45)
Test#1 (Memory)
8.81k
3.78k (x0.43)
TOTAL
39.34k
21.53k (x0.55)
Multithread
i5-1135G7
i7-5820K
Test#1 (Integers)
12.43k
18.07k (x1.45)
Test#2 (FP)
54.95k
64.25k (x1.17)
Test#3 (Generic, ZIP)
26.41k
27.03k (x1.02)
Test#1 (Memory)
7.38k
8.03k (x1.09)
TOTAL
101.16k
117.38k (x1.16)
AVX optimized benchmark
The benchmark in mode II (AVX) is optimized to used 256 bits registers beside the first version of the Advanced Vector Extensions (AVX). The first AVX compatible CPU was released in 2011.
Monothread
i5-1135G7
i7-5820K
Test#1 (Integers)
15.12k
12.03k (x0.8)
Test#2 (FP)
23.4k
11.23k (x0.48)
Test#3 (Generic, ZIP)
10.9k
4.55k (x0.42)
Test#1 (Memory)
9.41k
3.72k (x0.4)
TOTAL
58.83k
31.53k (x0.54)
Multithread
i5-1135G7
i7-5820K
Test#1 (Integers)
45.69k
49.48k (x1.08)
Test#2 (FP)
74.42k
52.21k (x0.7)
Test#3 (Generic, ZIP)
29.8k
19.7k (x0.66)
Test#1 (Memory)
7.16k
7.67k (x1.07)
TOTAL
157.08k
129.06k (x0.82)
Performance/W
i5-1135G7
i7-5820K
Test#1 (Integers)
1632 points/W
353 points/W
Test#2 (FP)
2658 points/W
373 points/W
Test#3 (Generic, ZIP)
1064 points/W
141 points/W
Test#1 (Memory)
256 points/W
55 points/W
TOTAL
5610 points/W
922 points/W
Performance/GHz
i5-1135G7
i7-5820K
Test#1 (Integers)
3600 points/GHz
3343 points/GHz
Test#2 (FP)
5571 points/GHz
3119 points/GHz
Test#3 (Generic, ZIP)
2595 points/GHz
1264 points/GHz
Test#1 (Memory)
2242 points/GHz
1033 points/GHz
TOTAL
14007 points/GHz
8759 points/GHz
Monothread performance graph
Monothread performance graphics gives the performance vs time. They are useful to measure the time it takes to the CPU to reach the maximum performance.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Usually, CPU's performance will be steady during these tests but if it has a slow frequency strategy, the first samples will show a lower score.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Multithread performance graph
Multithread graphs measure the performance against a heavy load during certain time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
If CPU's TDP doesn't limit the frequency and the machine is properly cooled, performance should remain steady vs time. Otherwise, the performance score will oscillate or decrease over time.
Test#1 (Integers) [points vs time]
Test#2 (FP) [points vs time]
Test#3 (Generic, ZIP) [points vs time]
Test#1 (Memory) [points vs time]
Hardlimit Benchmark Central - Ver. 3.11.4